© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I wonder if you guys might have alternators that were "upgraded" when previously rebuilt. Even the stock 80A alternator caused enough problems...
Really? I thought that I was giving some sound financial advice ;).
Are you 12 years old? I stated a fact -- if you don't like it, that's your problem.
On the promise of selling millions of $40K Cybertrucks that would be better than today's existing $60K ICEV Trucks = didn't happen. The new...
You're right -- we can't! TELL US WHAT IT WAS!
How did you determine that you needed the 107576 sensor and not the 148676 sensor? (But I confess that I can't figure out what's shown in the MCP...
No, but if you have a good running engine and all the marks are well aligned at cyl #1 TDC (flywheel at PM1-4 and #1 at end of compression stroke)...
Unfortunately, those don't seem obviously bad. On your 412, it should have a fuel line connecting the "inlet" ports of the two WURs together = so...
Another off-topic response? WHEN, GENIUS! "Someday, it will pay off" is not an answer -- it's deflection -- but your Master Musk is an expert at...
You should (and should've) measure the fuel pressure after engine shutoff to see if the residual fuel pressure falling to quickly is what is...
If you mean that the alternator (battery) warning light does not go "off" when the engine is running, have you confirmed that the alternator V-...
Does your alternator warning light in the dash come "on" when you turn the key "on" (engine not running) as it should?
+1 -- and it is kind of ironic that modern, fuel-injected, Lambda-closed-loop engines with great electronic ignition systems that have these...
+1 -- but can't agree about the "no need for the exotic/expensive design plugs". Iridium spark plugs have a so much better anti-fouling...
The only places in the F documentation where I've run across those kinds of suffixes to the F106A are: 116/75 OM covering standard (euro) dry...
Yes, the larger port connects to the control pressure volume of the system. No, but there is a disc valve between the large port and the small...
That's always best. If you mean hose #33 here = that's good and normal:...
I don't know of anything "better". Generally, if the switch configuration shown on the outer case is the same, and the voltage and current...
Why don't you measure the control pressure and the regulated fuel supply pressure when the fuel pump is running? The control pressure is a fairly...
No, I agree with you that an electric motor with more mechanical drag draws more current at the same applied voltage (and tried to explain why)....