© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thank you for the diagram. I’m going to work on taking the steering column apart this weekend. I removed the airbag and steering wheel about 2...
I have just checked the blue wire going into the wiper ECU, and I am getting 12.2 volts with the ignition switched on and the wiper switch off....
Thank you for the insight. I am going to do some more troubleshooting. If I figure it out, I will post my results here. I never drive the car in...
My 360 started a weird new habit recently. As soon as I turn the ignition on, the windshield wipers turn on full blast. The lever on the steering...
The 360 coilovers are pretty easy to adjust yourself if you have some basic mechanical skills and the correct spanner wrench. There are several...
I’m 22 and have a 360 Spider. I know the OP said 200k plus exotics, but here’s my input anyway. I’ve been very blessed with my family situation,...
Harmon Rocket? Sent from my iPhone using FerrariChat.com mobile app
[ATTACH][ATTACH] Just washed after a nice Christmas Eve drive Sent from my iPhone using FerrariChat.com mobile app
Did your car previously have a heat exchanger failure? Mine failed around 40k miles, and I’m wondering if that could be a cause of overheating and...
That’s such a bummer. What is the mileage on yours? Sent from my iPhone using FerrariChat.com mobile app
Wow, very interesting circumstance. That’s the first I’ve heard of a head gasket failure on a 360. It sounds like you really rebuilt it the right...
What prompted you to do the head gasket / valve job? My 360 has 47,000 miles, so relatively close to yours and I’m wondering if you found anything...
This is my main concern and the reason I started this thread. I was hoping someone would know the answer to this. I have to believe there is some...
Yes, I found TDC through the cyl 1 spark plug hole and checked the rear markings. Sent from my iPhone using FerrariChat.com mobile app
I flushed and bled the F1 system without any software. Brand new fluid, upgraded pump, and upgraded relay. The timing was checked manually....
I did purchase the Hill Engineering cam tensioner tool and their flywheel locking tool. It would have been a much harder job without those....
You don’t need any software to do a belt change. I just did all the belts on my ‘01 360 F1 after watching a few YouTube videos. I previously had a...
I’ve seen that Ricambi kit and it’s the next thing I’m ordering for my car. Sent from my iPhone using FerrariChat.com mobile app
My reverse lever in my 360 F1 is broken. It doesn’t lift up past the detent anymore, which I’ve heard is a common issue. It just pulls straight...
It’s nice to hear there’s another local 360! I’m in Merritt Island with my 01’ Spider. Sent from my iPhone using FerrariChat.com mobile app