© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
It should be easy to work out. Under normal temperatures, a mastic type sealant (which is what you are hoping for) is pretty solid, but goes soft...
Rear lights might come apart if you put them in the oven at about 100 degrees C. Front ones like Carello lower fogs definitely do as I've done...
One of mine got damaged somehow and it split the rubber outer gaiter on the plug end adaptor and burned the inner cable where it joins it, hence I...
It's definitely not easy. I think Ferrari have a supplier clause in there somewhere. I had a similar issue with active dampers on my old BMW once....
I don't suppose anyone has found a source for the Ignition lead spark plug end connector? They are proving hard to find outside official channels...
My understanding is that the belt places a lot of tension on only a few teeth when it’s at rest, so those cars that don’t do many turnovers risk...
The ones I have seen need a biblical amount of rust repairs. Beware the shiny paint job. Mind you, we have salt on the roads in the U.K.
This may or may not help, but I replaced my seats with 355 ones and had the same problem. I was able to go down a gap between the seat squab and...
Well done! I have a Black/Black 1993 TS in the UK. It's reasonably well behaved most of the time, but this month its decided to lose a tooth on...
Values don't seem to move about that much from what I can see. Ones that have been driven command just as much if they have been looked after...
Lots of the you tubers stick to a formula on time, somewhere between 10 and 20 minutes. James (Jayemm) is the same, and in this case, he...
Thanks!
Ive done a couple of longer runs, one with the originals and one with the 355 seats, and they are definitely better on the sciatic nerve!
Welcome to my car! I went with the 355 seats on advice of my Ferrari Garage. They do a lot of social runs into Europe, and I was told the 348...
[ATTACH] Sent from my iPhone using FerrariChat.com mobile app
At the risk of resurrecting a seriously old thread, I don't suppose there's an STL file for the 348 switch panel kicking about? happy to make a...
My only wish is that Scott spends just a little bit more time on his edits and equalising the volume across the finished video. I recognise he's...