© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
never mind, figured it out.
I want to pull some wires to the door using the door rubber boot that already has a few wires. I am not able to figure out where under the dash...
Any recommendations around the Princeton area for wheel alignment? I know one option is Ferrari of Central NJ but looking for independents around...
I am interested in this as well.
Thanks for that, so the nut is a 19mm? I guess I need a thin socket to get into that notch where the nut is fastened. Let me take another look. No...
Thanks for the detailed pictures, very helpful. Yes I have removed the drop link, my problem seems to be figuring how to unscrew the nut, not able...
Am in the process of changing a few suspension components. I was able to remove the shock absorbers in the front and replace the bushings in the...
Mike, that would be very welcome, thank you!!
Yes, Already in the process, stuck because of the adhesive situation. Lots of information on these forums and Aldous's blog has very good...
@mike32 - Thanks, just added the location. For the cheaper alternative are you referring to the EA 9466? That is out of stock too, though might be...
USA. Tried Hill Engg and superformance, neither have it in stock.
I am planning to replace the ball joints on my F430 with Hill engineering parts. Have all the parts except the adhesive (9360 or an alternative is...
I installed the Joying 7" along with the F430 infotainment trim kit. I have access to the buttons behind and does not obstruct the vents. Without...
Corey, I thought I would go and try it out and realize my software is called Diagzone Pro - not sure how different it is to them though looks very...
I dont remember the exact steps but it was straight forward. I think I went to the actuator function and reset the steering sensor and that was...
@CoreyNJ - I had the same problem, Brake light would off after about 15 miles every time I drove. Used thinkdiag to reset the steering angle and...
I found something on Amazon similar to what @Mrjb uses https://www.amazon.com/gp/product/B074NDR825
Thanks for all the information. The workshop manual does not have the torque to be applied for the tie rod, do you know what value you used?...
Thanks for the update. I am going to be doing it on a 430 but it looks similar. Did you get the rod from prosport or from exotic? thanks!
@Mrjb Did you make any progress on replacing the inner tie rod? I am going to do that and was wondering if the entire steering rack needs to be...