© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Sounds good. I should of mentioned that I flushed my entire F1 system and put in Liqui Molly hydraulic fluid. Steff at Scuding Swiss helped...
The Ediff uses the same pump as the F1actuator . But you need to bleed it separately. I think the bleed nipple is on the driver side above the...
I thought iIwould chime in on this. I did my clutch on my 430 a few years ago. There is a thread here on Fchat. As for parts needed. The Hill...
I use Vavoline 75/90 synthetic Works great. Took all the chatter out of the gearbox. GL
Its a low battery. need to keep it on a tender like everybody has said. Low voltage causes all sorts of gremlins GL
I bet its the clutch throw out bearing. Mine had the same noise Changed the clutch and bearing and it was gone GL
[ATTACH] Mine is the red one!!!
While you are in there, replace the trans mount and valve cover gasket's. Its pretty cheap and easy to do. I did it on my when I did my clutch...
It could be one of the axel shields that has a broken tab. It will rub on the CV boot or axel if it sags. It's there to protect the CV boot...
I think it's the same as the 430. The F1 sensor is inside the trans housing. I takes it's reading off the TOB So yes.......trans has to be...
gqmd, You do not have to remove the actuator to bleed out the fluid if you change Liqui Moly. It has a return line and most of the fluid left...
After the car has been in storage, its common for the light to show up. Need to drive it . Get the engine hot and cold a few times. It will...
Hi gqmd. I noticed in one of you picks of changing the EDiff valve that the fluid is still red. Looks like you still have Donax in the...
Yes...... The Launch does the PIS setting and you can bleed everything but the Ediff. No support for that on the tool as of now. Mine is version...
I did do a drive yesterday. Weather was great here but still lots of gravel on the ground. So I had to pic the roads carefully.
Oops. Yes..... You are right, I missed the 3 pedal part. Sorry.
It's the PIS. The clutch needs to slip a little bit at take off. Try adjusting it and you will see. If you have a Launch tool you can adjust...
The PIS is set too low. Try adjusting the pis from your current 4.8 to something like 5.2 or 5.4. It will engage the clutch a bit slower ,...
Forgot to mention the pic is my first drive. Probably 50 feet. From the trailer to the garage !!!!
Nice color. Love the challenge wheels. I feel your pain. I live in Oregon. Got my 430 last year in Dec. Snow on the ground for months....