© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I think I originally left the white backing off, but installed it was too bright. I re-did it with the backing. It not only toned the light...
It's been a while, but I think my gauges came with a sticky backing. I don't remember having to use my own dbl-sided tape.
Yeah my car has full carbon fiber interior.
I also did used the repair kit. Very easy and works well.
FINALLY got around to wiring this up last weekend. Thanks Qavion for getting me started! Very helpful. Here's how it turned out... Terminal 2...
Thanks for the info. It may be this weekend before I get to it but will let you know.
No I have a Forza controller. I had hard wired it using a generic switch, but got a hold of a 360 sport switch. Now it should look like it more...
Anyone know the wiring for the SPORT switch on the 360? I'm actually going to use it for my 430's valve control. I found this diagram in a 360...
The Autel AP200 is a great low cost scanner (~$60). I've been able to clear any codes from Capote to Engine to Airbag as well as read PIS and...
Temp doesn’t matter. Operationally it’s entirely dependent on hard acceleration or RPM.
Sorry... That's the wrong part number! I was trying to confuse you (not really). That's what I get doing this from memory... It's a Pierburg...
Simplest way I can think of is replace one and see what happens. search Amazon for this: Bosch 0280142308 Purge Valve $35. A small investment...
FWIW, my valves open on initial start then close after "a while". I'd estimate ~30s, but either way that's normal. I'll have to go back an...
I assume when you plugged the lines to check vacuum, the valves did open? If not, they're probably jammed up enough to work only under the right...
Can you test the vacuum above 4K rpm or under heavy load to see if the vacuum is being interrupted? You'd probably have to attach a hose to the...
Got it, thanks. I was going to start with the switch.
Yeah, that's a possibility too. I checked the connections under the seat anyway, and they're all good.
If I leave the passenger airbag switch in the "on" position, I get an AIRBAG light and these codes: 1449 Passenger inhibition deployment switch --...
Well that sucks. Thanks for the tip!
out of stock for both