© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Took the WUR apart and measured the resistance directly on the heat element and all seams perfect, 47 and 35 ohm and now when I measure at the...
I read the thread you linked and did a measured the resistance in the WUR, it read 0.5 ohm so I definitely have a problem there, that’s why I have...
Ok thank you for your advice. It is a euro version. I will unplug the injector next time to see if that is the problem. How hard is it to just...
Well yes, i just suspect that the control pressure is the problem, I can’t actually control the pressure, the only thing I really sure of is that...
I have a problem that I think is linked to the WUR regulator, when driving at normal speed it sometimes put the choke on, or as with the regulator...
I think I took out the victory a little to early, still have a spot around 5000rpm where it hesitate at full throttle, but not at lower rpm. Is it...
Thanks all, I fiddled with the WUR today and found a lot water in the connector, also adjusted the co, was around 5% and turned it down to 1%, and...
Aha sorry, it’s a euro model sold new in Italy and spending his old days in Sweden ;) so no lambda or catalytic converters, or smog pump.
It’s a -85 GTS QV
Because the tank was full of debris from my old in tank pick up filter, and the fuel pump is before the fuel filter so I can just imagine how much...
Hi all, as the header says my QV hesitates when accelerates and i wonder if anyone have had the same problem. It all began when i changed my fuel...
Connections to the car, or from the pump to the hose.
Just bought it from ebay Germany, it was a sd7H13 7312, I read here on the forum that that one would have the same dimensions, but I didn’t know...
So I bought a new Sanden sd7H13 compressor, fits like a glove, but, and it is always a but with these cars[emoji17], the old compressor have the...
Thanks for the help guys, it ended with a strainer for a Mopar, just had to drill the hole from 5/16 to 15mm. [ATTACH]
This is what I’m looking for: [ATTACH]
I think it was a mixture of the old in tank filter strainer and debris, the car has sat for a long period and probably the strainer has corroded....
So, I was about to change my fuel filter and fuel pump when I found a black goo in the filter, so I removed the fuel pipe in the bottom of the...
Just what I was looking for, thanks a lot. Sent from my iPhone using FerrariChat.com mobile app
I’m restoring the callipers and wonder if anyone changed the rear calliper pistons. Don’t know how to get out the internals in the pistons, it’s...