© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I'm considering looking to get out of my 360 manual Spider and (hopefully) into a 488 Spider. There are things I wished I had known before I...
So I've finally gotten around to de grossing my dash vent rings and naturally (I full expected it) the small white arrows are gone. I'm wondering...
Thank you all so very much for the tips, I really appreciate your input. To answer one question, the track is Sandown in Melbourne, Australia and...
Specifically, known good brake pads, tyre pressure recommendations (Continental Contisport 285/35/ZR19) mainly interested in brake suggestions....
From the other side!
I'm chasing one if these covers for the plug on the MAF sensor - mine disappeared somehow and now I can't find one. I'm sure there would be an...
Check your messages John....
I bought supposedly original Bosch MAFs from a UK based seller with VERY high feedback and the car never ran right with them. I tried all manner...
In my chasing down faults, I've now replaced every single sensor on the engine. The car is nearly 20 years old, and I figured it couldn't hurt, so...
Please keep us updated as to the improvements. Mine started off really well, then just as quickly went bad. The fix was putting in the new...
Unfortunately I don’t have the data you’re asking for. My fuel trims were within spec but I constantly got bad ground codes for the MAF circuits....
Manual gearbox
This is more for the benefit of other owners that anything, but I wanted to share my "journey" with all the problems and DTC codes. Ever since I...
That's pretty much exactly what it does. I'm intrigued by your post. I bought my MAFs from a UK supplier as they were hard to find in Australia....
Remove the rubber bellows off the throttle bodies that connect to the MAFs, get another person to sit in the car with the ignition on and operate...
Checked the throttle bodies. All good. I gave it all a good clean inside the seat for the throttle blade/valve. Alas, the quest continues.
Sorry for the late reply to all this, I've been away from my computer for a day or 2. I have added extra earth leads to various spots in and...
Removed both wires, cleaned surfaces on firewall, wire connectors and bolt and reassembled. No arcing or looseness anywhere. I'd love to know more...
I was thinking of doing just that....now I definitely will. Going out to do it now.
I drove it last night and this time it threw out a P1104 as well. Everything seems to be related to either MAF or o2 sensors.....but they're all...
