© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
My upgraded ones look identical. The newer orange rings were not available when I did mine so I have the white rings as well. You should be good...
[ATTACH]
With the help of a cheap OBDII blue tooth dongle vs my launch I was able to get the P1116 code that led me to the O2 sensors causing my CEL light...
Put some spray lube on it . Did as you said. Worked ! Thanks !
Can someone tell me how this red connector unlocks? [ATTACH]
[ATTACH]sound asleep
Night night until Spring .
Put a 4oz bottle Redline LSD in which helped a lot . Using Redlines. 4-8 % recommendation that was still less than 4% . I’ll probably add a bit...
I know this has been asked before but for the sake of current fluids available what have the DIYers or shop folks had the best results with? I...
It listed on the Launch 431 as “ output shaft “ ? Live stream data I assume
I am about to remove my dash cover to have it recovered . What should I specify in terms leather type ( Connoly ,etc) , thickness , french...
Ricambi had them
A “thank you “ to Dan Hurlburt , YouTuber , Normal Guy Supercar, for his legacy video . a big help to get the job done easily .
Put a new battery in it . Did it solve the code problems? ….. no. Ugh
The other code I’m getting which is interesting is the left bank upstream O2 sensor . So I replaced it . Problem solved ? But no . I got the same...
Actually I replaced all of them last year . Why? Launch would code them but I never got a CEL light . I subsequently learned here on FC that...
Launch mini pro : Code: 020e0327 and 020e0332 Launch says “ refer to manual” Any ideas?
CEL light coming on . Checked codes , one is for an O2 sensor just replaced , two others are for Motonic left and right but when I read the actual...
I had removed and replaced the intake manifold last year. All gaskets replace and all fasteners torqued to specifications and double checked . (...
As I work through the original issue of this thread I’ll try to keep it current should another owner encounter a similar issue . What I can say is...