© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
In more investigation, attached is a picture from 1982 Mondial QV electric wiring (I have a 1982 Mondial 8) and by tracing I think it shows the...
Cool, thanks! I am not 100% positive on what you are calling the electrovalves, but maybe they are as in pic attached (from another FerrariChat...
I.suppose one hack is to leave the connector to the air flow meter disconnected (actually I removed the CIS so trivial) then use the fuel pump...
Either I guess. Can always convert low current to high current with a relay ...ECU has a thin wire it wants as input and then it turns on...
Hello, I have a Mondial 8, which has the 2v 308 engine, and I am installing EFI and full aftermarket ECU (AEM brand). Anybody know of a...
Intriguing notion, but now it leaves me even more confused. A picture would be worth a thousand words... Here are two more pics: The one with my...
Hello, I have a Mondial 8 with engine out and about to put back in after lots of work. I am having some trouble identifying where the coolant...
Do you still have this available?
Removed cable and it is seized. I see it falling about about where the exhaust pipes are....so far I cannot find a part number or source for a...
All, I hope this thread is still being read... I have an 82 Mondial with engine out and I am reconnecting the parking brake mechanism on one side...
All, I am reassembling my motor after an engine out...does anyone recognize where this heat shield goes? It has only one hole for a bolt. It is...
BTW, I did this once with engine in and once with engine out, Mondial 8. With engine in, my camlocks slipped a bit (few degrees) and I think I got...
I saw those comments about electric transmission use...but does that matter? If its an easier of attachment compatability, etc, that is mute since...
All, I am installing EFI and more on my 2V 308 engine in a Mondial 8. I am soon tackling adding a TPS. While I had thought to somehow connect it...
You are right. With a civil engineer friend of mine we looked it up..my 0.5 inch grade 5 steel bolt has a shear resistance of at least 11,500 lbs...
Hmmm.....you made me realize the difference of a top mount where the car weight is on the top plate vs not. The second link you set seems quite...
Hmmm ....maybe that is equivalent....however a key thing is the top stock mount supports a small amount of twist. That is why I put a spherical...
Experiment request: anybody with a Mondial 8 care to measure the clearance between top of plenum and the engine lid? My 8 has the engine out and I...
Anybody with a Mondial 8 with engine installed care to do the experiment to determine clearance between top of plenum and engine lid?