© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I’d have to refer to the shop manual for the procedure but I can say I had no issues with the alt belt when I replaced all the belts including the...
I have after a belt and tensioner change. I drove it to verify I didn’t have any coolant hose or oil line leaks. With if off it ran really cool,...
[ATTACH] Maybe a bad batch. I had no problem with alignment and was able freely thread the fasteners in.
[ATTACH]
Sent message with an offer..
Merry Christmas to me! My wheels and Titanium lugs arrived today. Thank you very much Oliver! [ATTACH] [ATTACH] [ATTACH]
Get the right tool, worth every penny!
I’ll take that set. Sent you a PM and I think a text if I got the right number for you.
Are these the gray?
Well I’d much rather it be that then the rear main. I’ll drop the pan and reseal. Thanks for the heads up on the possible pan leakage Riverdriver!...
Neil22 I’ve got the same leak on my 360. Seeps oil out of the main seal. Have ordered the rear mail seal and rear crankcase housing gasket and...
Thanks for the reply. 👍 I have a 2001 360 with a 191701 TCU and haven't been able to get the Xdiag to connect with the gearbox.
Mkzhang, is your car a 430 or a 360? If a 360 which TCU do you have?
Always good when it say PASS! 👍 [ATTACH]
Last time I opened the xdiag app on my tablet while connected to the internet it notified me there was an update for the app.. I don't have my...
The WSM says to place the frequency detector to the midpoint of the longest belt branch and with a screwdriver strike the belt near the detector....
Was there a service bulletin put out for this noting the incorrect tensions for the non-CS cars? And is that correct, the P/S Pump frequency...
Bert, I bought a MOTOREVA Harmonic Meter. I was about to order one online ($249.99 US) but was able to find one on eBay that was pretty much brand...
Thanks Raimondo! It always helps when you're in agreement with how something is interpreted.. Last night I set the gap per the WSM and...
Mikael, I used new Hill bearings and new belts and new tensioners.