© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Indeed. Is the fault common? Thanks FastVic for the details. I don't understand if you had to cut anything of if you just took benefit off the...
Hello This thread is scary for a Mondial T owner!! What is going with the steering rack, is there some known faults? Could you share the...
Hello [ATTACH]
Hello In my case the noise I had was heard by the gearstick in the cabin. After all of this I still have the same noise, linear with engine...
Hello if your brake light is on and you loose brake assistance bfter a few pedal operation I would think the brake pressure switch if it happens...
Hello I had the exact same behavior with mine, around 190/170Hz on both sides (with the pins fixed) when bolting the tensioner at full extension....
I see what you mean but I really don't know what is the safest advice to tell to Op because there are mistakes in all torque specifications. I...
Hello Tightening torque on steel or aluminium is the same provided the minimum thread length is respected in aluminium (1.5xdiameter) which is...
Yes.. I managed to get my hand on a new one still in his packet (produced in 2007) for 300$ and it was the only one I saw and I will keep it...
Updated oil pump tensioner
Hello After a very short brake assistance loss a few months ago that I hoped was solved by cleaning/greasing connections and earth, it appeared...
The belt can Indeed been retensioned once as Saïd in the workshop but they also state a mileage limite for the belt and I think it is 1500km..? In...
Hello Thanks very good information! I dit set mine around 140Hz also but to do so I had to remove some tension from the rest position of the...
Hello! Very nice exhaust! What about the sound level? Is it too much obnoxious, for example at idle from outside?
Yes on the belt walking.. don't know! Yes the frequency was about 180/190Hz with the idler strecthed to the fullest (with a new spring) so I...
Hello Very interesting discussion on the pulley! Would you think the pulley tension has also an effect? When I did my belt and trying the...
It would be nice if it is solved! From what I remember to have understood in the 328 HG topic I mentioned, an engineer from Elring was saying...
I have read lots of issues here with people changing the heaad gasket on their 348 and having just literraly no water sealing and had to try two...
Hello Wow I got TIG welded my fences but I am not anymore confident when seeing your case.. I look forward to see how it will goes on with the...
Hello Removing the starter is very easy. Just the 3 bolts to undo indeed and the electric cables to undo.