© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
At a later stage, you will need to rivet it again on the bumper You will need to use a metal spacer on the top side where the rivet will squeeze,...
to check ball joints and tie rods, lift up one corner, take the wheel firmly in both hands in different position 12 -6 and 9-3 ... 11-5 for the...
Sorry for highjacking this thread but truth had to speak about K specs... I still would be interested to know what choice you will make for your...
I think what you need to make sure also is that the carpet cover is as bad as the original :) Watch out for the color and length of fibers...
This is life after death for this 612!!! I am impressed how engaged you are, I don't know any garage ready to tackle this type of job on this side...
Scud ing would have prevented that indeed, I have one, it is working well, you get the fault diagnostic when something happens and know which part...
That sounds scary, do you have other damages resulting from this ? I mean if the pump kept on pushing, I guess you either had a safety valve...
+1 F1 fluid flush does wonders, mine was 14 years old and although the car has little mileage, I could feel that gearshifts got crisper If this...
I can tell you for the 612 which i think is exactly the same for the 599 Really easy job, I would say maximum 1/2 hour. Airbarg needs to be taken...
the material underneath seems like a nonwoven, you would need to find something similar. But I do not know how I would unglue the old one. You...
Just looked at their website, there is no 4s nor cup2 available in those dimension ( at least in Europe) even the MPSS does not seem to exist in...
but hey getting tires from the us... you will have as much tire as transport cost... My friend with his 19 inch also had issues finding MPSS, he...
Same here, it starts to turn same as yours The conception of that floorboard is really cheap, and I think it is a piece of cake to redo a new one...
Indeed I looked too, impossible to find I see though that the PS2 in K2 is available, I remember that I had them on my 997 4s, really liked them...
No not the same tires, take different spec and you will see the design is different, there has been threads on the topic already Manufacturer...
Did you have a lot of play in the original ball joints? could you feel it by shaking the wheel at 12-6 oclock? I had to use a lever to check for...
Hi Tomc, not a sessenta, a GP Berne special edition, a wonderful car, there were only 9 made
Check that you get K rated tyres I have mounted the MPSS in K" (20 inch) recently and the car is transformed. No more locking when braking hard,...
[ATTACH] [ATTACH] [ATTACH] We went today from Zurich to St Moritz to Davos and back 500 KM 2 fantastic mountain passes and lots of burned rubber
It started to appear after my F1 fluid change, the garage overfilled the fluid, the reason I know is that it created a spill around the gearbox...
