© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I think it's great what he's doing with this car, hope it's a long term keeper. He seems to be finding as I am, it's actually the most rewarding...
I'm on assembly 588 and the matching marks on the subframe are 316. I wondered if 316 meant it was the 316th tb through or something. Why do you...
Changed the horse back to the original black for an '89 build car. I really like the stealthy look.[ATTACH]
The oil leak could be from the cam end seals, on a 1990 car it won't have the updated drain holes in the heads, I've the same problem on mine and...
Use willtheyfit.com to check clearances it's pretty good.
[ATTACH]
Here's the info I collected when i was doing this: Std 348 5x108 67.1 bore Front 7.5j17 et+49 Rear 9j17 et+68 Std F355 5x108 67.1 bore Front...
I use this for fasteners if you don't have a torque spec or if you are in doubt. I've used it to calculate various sump plugs and difficult...
I often refer to it as just a car to other people, it is in terms of working on it, it's just like any other car just parts are a bit more...
Quite frustrating isn't it, I've had various states of working, not working, going haywire. Then finally lost all power so set about a proper fix....
How to make a genuine car look like a replica!
Hi guys, For a while I've suspected my HVAC issues have originated at the 26 way AMP connector at the rear of the unit. Could not release the...
Hi, It's engine out season again so I thought I'd share this from my experience last year.. There are lots of good how 2's on here that cross...
[ATTACH] Rolled up to a wedding and there just happened to be a Bentley owners club event at the same venue!
Couple of pics from a local event. [ATTACH] [ATTACH]
If you are confident the nut is presently torqued correctly, mark the nut before removal relative to the flywheel, then refit with the impact to...
Air con pump?
I will investigate that, I had discounted this module because the fault is intermittent so had assumed the chips are fine but it could be a dry...
Yes please if you can, it would be good to get a concensus before I go for reinstating a link
Thanks for sharing, It's hard to tell but maybe could be a fusible link on the board that has blown. I'm still not confident enough to put a link...