© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The car build predates the LS engine, seems they were built by a Scuderia Maranello in Belgum, later cars had the 355 engine
Porotype race based on 348 running gear Racecarsdirect.com - PROTO MR400 Powered by FERRARI
The owner of Quantum in the UK hill climbs and runs his 348 in the Ferrari Club race series and will give valving and springs to suit your application
Doors, rear lights and front lip look to be inspired by the 348 LM
It will depend on the regulations, of that specific series. But from scrutineering perspective all the cars I check run FTL 3 tanks, because...
I would not rule out the stem seals until you check them, thy can crack and harden with age
I looked at this when I rebuilt my 348 engine, the blocks are more of an evolution of each other, they share the same main dimensions bore...
Cinel do a new Speedline "look" wheel GT – Cinel Forged Wheels
Howel racing in the uk do a plug and play kit basest on a syvecs ecu (Life Racing) to replace both ecu's and control all the fans and pumps.
The challenge factory manual has the geo specs if i have time will scan them, also ate they the correct offset wheels
Firstly rack speed is not measured in lock to lock, it is measure in mm travel per rotation, for example my gt86 race race has rack spacers to...
!0 years ago i had a bunch of BMW e21 quick racks built as they where not available in the market place they where about $400 each for the rack...
For a Japanese challenge car it does not have the Japanese spec brake cooling, and gloss carbon does not work on 348 interiors IMHO, but I hope it...
Glenvarigill went bust several years ago so no longer exist, Greypaul are the local dealers now
Dubai cars are viewed negatively as the quality of maintenance can be poor and 8/10 times is, the climate dry rots a lot of the plastics and...
If you want a period looking seat http://motordrive.com/pro-seat-range-2/ can do the seat in a kelvar shell
It looks similar to the M3 ones i have done, an with those you carefully peel the metal can of the outer joint slide put of the way, then rotate...
Audr r/s4 v6 twin turbo engine to a boxter gear box https://www.pistonheads.com/gassing/topic.asp?h=0&f=&t=1571615...
For the internal nylon hose dorman make a lot of fittings and do a generic repair kit https://www.dormanproducts.com/p-27520-800-300.aspx...
I got the kit from Ricambi, and the pad from graham (possibly the last one) when i rebuilt the engine last year. I tired every source i could...