© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I had used this on my F430 when I had one. Same comments as above. Very simple and does exacatly what it intends to do. The question you have...
I am generally a parts cannon when in the car or doing a major. YelCab can attest to this. In general, my philosophy is that while some things...
I use both a Garmin and a vBox in my track car. The Garmin is great for how easy it is to set up and transfer to other cars and can help push...
For a 95 2.7, the locks should only activate from 1. Door key turning 2. Lock button in front of shifter 3. Unlock button in front of shifter...
Check with EAG in TX. They're the leader in auto -> manual Ferrari conversions, though the 355 is not supported by them at the moment. They may...
and one of what they look like all cleaned up and installed [ATTACH]
Coincidentally, I am doing this job now with my '95. The old rubber was visibly cracked. Worst are the rear upper wishbones closest to the frame...
Subscribed. In the process of purchasing a 599 from 08. The KW and Novice options for coilovers looked pretty different. Curious what you find...
They actually like having custom things roll across somewhat regularly. They do make you go no reserve when they can't value it. I was pushed...
If you can smoke test the header, do so. The gaskets don't show an obvious break path, so there's likely a header crack to blacken the cylinder...
Workshop manual page F26 https://www.the355.com/showworkshoppage.php?page=102&volume=2
That light is tied to the actuators. They go through an initialization procedure when powered on. It involves full range of motion in both...
Superformance.co.uk does sell the Hill Engineering version. Little pricier, but they ship surprisingly quick. But I do agree with tbakowsky that...
If doing fab speed, I'd add the optional header blankets. However, like a lot of others on the forums, I went with Tubi and they've been great.
You need to lift the F355 approximately this high to remove the engine and subframe. I have it sitting on a harbor freight pneumatic wheely cart....
it's all sealing the same fluid [ATTACH]
Pathing it out. That o-ring seals against the bearing for the flywheel. It should prevent the same fluid that pushes out the piston (with triple...
Deltavee rebuilt my shocks in 2019. Took them a year to do it. ping me if you want owner's direct email
You may not need the sparco base, but that looks like it'd make life a lot easier. I bolted my brackets directly to the stock sliders. It...
Stoptech makes kits that work on the F355 under stock wheels. Don't have all the images readily available. It's a very close fitment but does...
