© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Check out Denver Auto Shield. 720-780-9164. They apply XPEL. Did my 2007 F430, and two of my daily cars. Excellent work, and the place that...
Thanks. FYI i am taking the car up to Dave's shop. They are confident they can handle the project. Much thanks to all the commentators.
Thanks for the details. As i mentioned, the issue was found due to an EDIF error, but when the system was opened metal slivers were found in the...
Good idea. Will discuss when I decide where to do the work. Thanks.
Great idea - will do. Thanks.
We did drain the fluid, and there are tiny particles swimming in it. As mentioned, the EDIF valve was alerted to this issue as it was stuck...
A gated machine still needs the pump etc for the EDIF.
Thanks. I agree - cleaning the EDIF and the F1 valve body is my biggest concern. Let's see what other thoughts are posted.
Just had my day ruined when my indi called to let me know that the EDIF issues i was having was due to the F1 pump self destructing and sent metal...
They are located inside the frunk, behind the left side front panel. The fuses are in the rear of the two left panels. Sorry i can't find a...
Thanks! Tried this and so far so good. As soon as I can get it out of the shop and on the road I'll let you know the result. Thanks again!
Hi all - my indie mechanic just phoned and said my 2017 F430 Spider has thrown an EDIFF error which says: Stroke Sensor Zero Point Voltage C2013...
Oh wait - this was dumb. The stalk up/down controls the off/intermittent/ low/high and the rubber rotate controls the intermittent operation. I...
I've looked at both the owner's manual and the shop manual for my F430 Spider as to how the intermittent windshield wiper is supposed to operate,...
There is a burn spot in the center of each of the contacts. This is the contact area and is high resistance, causing voltage drop to the load.
As I mentioned in the original post, the PR7 relay i(as are all the other relays) is available from RM European at very reasonable cost. Here's...
As I mentioned, you are correct with some of the LEDs which glow when the DOOR timeout happens. However, the one I referenced does not do so.
Sorry I'm not sure I understand your post. If you are implying that in Auto a certain amount of current draw is required, it appears that the...
Just send me a PM with your address and I'll drop it in the mail. Does two work?
On the Ferrari Life discussion board, a lengthy discussion ensued about the long term reliability of the dozens of mechanical relays in an F430....
