© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Interesting pic of the broken piston - did the crank and rods suffer any damage?
Coating - It leaves a zinc phosphate coating, I just wiped it afterward with brake cleaner and left it - as you say, the piston doesn't actually...
I filled the piston bores with 'Metal Ready' from frosts, left it to fizz away for an hour or so - all the rust gone! use red rubber grease to...
Nick Try here: http://passionford.com/forum/archive/index.php/t-88670.html Seems to be scans of an autodata book about the ABS on a...
Try some Philips Extreme - http://www.powerbulbs.com/product_list_search.asp?criteria=x-treme I have had some of the Vision+ ones and they are...
Has the words CRAFTBEE at the bottom Google found http://www1.megaegg.ne.jp/~craftbee/top.htm
Hi Doesn't look like a VW / Audi LCD display
I may have a used one, I will look at the weekend if you don't have any luck elsewhere.
Try http://www.autoelectricsupplies.co.uk/product/153 Seems to list it as being 135 Amp.... or...
Thanks guys for your help, but I dug my compression tester last night, and checked them this evening.... (engine cold) 150-155 on 1,2,3,4,5 0...
Hi Thanks for the input so far. Breif update as not had much time to work on it. Both distributors are pointing at the red dot in the cut...
Hi With the help of people in a previous post I am slightly closer to getting my 308 to run again! (Dual Dizzy, Euro 308GT4 - R1 and R2...
In mine a previous owner fitted a mechanical oil pressure guage in the engine bay, 'T' connector behind the factory electrical oil pressure...
Looks like this could be a solution - reseating the lead plugs? Before I cleaned the carbs, there was a lot of residue around some of the plugs...
* UPDATE * Thanks to everyone for their help so far. I have fitted 2 new bosch blue coils, and have checked the dizzy by rotating by hand =...
Thanks for that. I redid the wiring today. The terminals on the marelli resistors are a bit 'wobbly', so I tried fitting 2 bosch black coils I...
Hi Peter Thanks for the info regarding the wire colours. Will check it all through today after redoing the terminals, and checking the...
Hope someone may be able to shed some light on this 1974 308GT4 - Dual Distributor. Euro RHD. Started off as a slight misfire - suspected...
Here is a pic of my 308GT4 with 16" 328 Wheels (non ABS) I think they suit the car, and with the new, fresh tyres, the handling was much...
Do you know if they took the levers out of the rear quarter when painting, and not reattached the cables firmly? Try taking the levers panel out...