© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I really like the light painting effect. Those look really nice. My 13 year old daughter took this pic playing with the process. Totally dark in...
What, you're selling???? No way Casey! One of the pics from the mountain drive a couple years ago is my computer background. Larry
Yep, that's the one I used (the one Ernie posted). I didn't know Daniel carried it though.
Thanks. I had some concern about idle charge and the upgrade as well because usually output increase means a reduction in charging at idle. But...
The alternator was reinstalled. No more noise and it is charging great! I'm hoping it is actually outputting the much higher amperage as...
THe stator wires were then cut to length and the terminals crimped. There is a small plastic cover that just pushes over these. The washer, fan,...
Then the stator was set in place with the wires pushed through the plastic cover. The armature was set in place and the bearing was tapped in...
I pressed in the new front bearing. These come in two sizes. The larger one is used on the 5 rib units and the smaller diameter bearing is used on...
There is a pin in the brushes that extends through the rear casing that keeps the brushes in their holder during assembly. [ATTACH]
I purchased a 220 amp upgrade kit from https://www.aspwholesale.com/alternator-upgrade-kits/delco.html. This includes bearing, electronics,...
This is where I hit a problem. The rear bearing was so messed up that it was pretty much frozen to the shaft. The contact slip rings are so close...
The armature was removed by tapping the rear bearing with a socket and hammer. This removed the armature with the bearing. All the electronics...
The front casing was just slid off in this case but others I've been inside took some light tapping to remove. There is also another washer inside...
I removed the shaft nut using an impact, which made the job easy. Then removed the pulley, fan, and three torx head bolts. There is also a washer...
After I finished my major a couple months ago I could hear a rubbing or bearing noise. It was isolated to either the alternator bearings or the...
Thanks! I think they stole a lot of styling from the MGB to compete with it.
Picked up this little 67 Datsun Roadster about a month ago. In the process of changing the interior to tan leather from back vinyl. [ATTACH]
Before. I just used the marks to time since they were on when I opened it up. Larry
New.
It is a metal impeller but I don't think the design is the same. The one I pulled is plastic and so is the one pulled in the previous major. [ATTACH]
