© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Here you go. Belmetric S/S 10 x 1.0 [ATTACH] [ATTACH]
Hi all, I recently purchased a set of Fabspeed sport headers and 200 cell cats. The headers were ordered with blankets and air injection. After...
Are those aluminum or s.s.? I have the same issue.
All, Just had the ECUs of my 03 360 Spyder 3 pedal reflashed by Sam, and Trev. I must say totally transformed the driving characteristics of the...
Do you have a link?
Yesssss, we have oil pressure boys! Ended up pouring 1 qt of oil into the pressure relief passage, buttoned it up and spun the starter for about...
Well, here is the latest, not good. Pulled the pressure relief valve, it was installed correctly, and is not sticking, no oil at the relief valve....
Did you see my message about setting up an appointment for viewing the car? Thanks Jeff
Joe, Very welcome, glad to help. Thanks, I love working in my shop!
Joe, Tearing my sunroof apart and modeling parts as we speak. Regards Jeff [ATTACH] [ATTACH]
Joe, Thanks for the insight, I will take a look at the relief valve. Am having lunch with Dan tomorrow, let me know if I can help you get what you...
So was spinning the motor over on the starter wanting to get oil pressure, went to raise the car on the lift to look for leaks and the lift was...
Joe, Thanks much brother. Another silly question, can the front trunk liner be installed as one piece instead of the two pieces separately? I...
Sorry, but is there a stud on the frame where the strap fastens? Thanks much Regards Jeff
Hi all, Well I am getting very close to see if the past two years are going to pay off or go to waste. I have finished all the plumbing, and...
Joe, I don't have the wiring diagram for your car, that being said, I would do the following: 1. Make sure you have 12 V to the starter. This...
Hi Urs, Thanks for the input, always valuable. After reviewing the wiring diagrams I concur with your diagnosis. I will leave as is for now, once...
Hi all, Had some surgery on my arm so not a lot of progress in the last month. Have been able to work on integrating the F.I./Ignition ECU wiring...
Brooklands, I installed the hoses from the rear, apply liberal amounts of silicone grease to the front six inches of each hose, push into the top...
All, Speaking of sunroof parts, my colleague has the production bits ready for distribution. He has basicaly a kit that contains all the...