© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I too am in the middle of PPL flight training, and at 11 years older than you, I sometimes question my sanity, lol. I used the Gleim online...
I also had that experience several years ago, on a very dark highway I was going about 75mph, and all of a sudden everything went black, very...
I think I got mine from GT Arizona
Don’t forget to search Tom’s blog as well as the forum.
Have her wear a scarf, but shorter than Isadora Duncan’s
Regarding the gas door lever knob, I believe it is the same knob used on the choke lever, in fact I think some of the mechanism is the same. I...
I meant to say that the gas flap release mechanism is also attached to the underside of the board.
I removed my rear shelf many years ago, so I will test my memory, but I just removed the padded bar a couple of months ago to remove the rear...
No experience with the external coolers, but ….. In my opinion, unless you could find an original radiator with the integrated olio cooler, you...
I bet the Alfa one is “correct” on some cars but the the tall leg has broken off. Look at Jim Eakins post #11, you can see what appears to be the...
The bodies were made by Pininfarina, here is the Alfa Duetto equivalent. 105.03.58.024.00/05. [ATTACH]
Here are the dimensions as far as I can get from the original and from the ones I made many years ago when I first got my car. Note that I marked...
I reviewed your sketch, it is different from what I made, and I am sorry to say I did not have much to go by, see my photo of the remnants I...
My original ones were made from a medium hard plastic, they were in bad shape. I made new ones from black Delrin.
Spring 37 looks like a torsion spring. Try McMaster Carr.
I believe that part of the reason many folks don’t recommend or use the chokes on these cars is the marginal design. Even when everything is...
Try Pierce Manifold, the go-to guys for Weber carb expertise and restoration.
Hmm, interesting. Are you sure about the need for a 60 amp fuse? That seems really high, What electrical circuit(s) would that be protecting? The...
[ATTACH] The suspension bolt that needs the steering box out of the way to remove is the one on the lower left in this picture…this pic only...
I needed to raise the box up to remove the left upper front “A” arm suspension bolt, this worked great for me but I understand that the steering...