© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I was living with leaky injectors for years and didn't know it. I had a hot start problem. If I stopped to go in a store or something and came...
I have an '87 328, US model. It has a master cylinder that has a bore size in the 25.5mm area. Part number on it is 1421639. Where the brake...
Just wanted to give an update in case it helps anyone out. I did buy the $120 steering rack on ebay and it works fine. I had to get a different...
I was leaning towards the cheap 308 rack, but I realized that the mounts aren't going to work with it. The 328's rack has the skinny tube all the...
Brand New Manual Steering Rack and Pinion Gear Assembly for Ferrari Dino 308 GT4 | eBay or directly 1980 Ferrari 308 Manual Steering Rack Manual...
I think I answered my own question. I looked at the Superformance part #s on the website and the early 328 part number is the same as the 308....
I contacted Superformance and they don't have it. I also heard back from All Ferrari Parts and they don't have it. I assume any Ferrari dealer...
The nylon/teflon(?) bearing in the ball joint is worn. The ball floats around in the socket it is so loose. It is pressed in and not repairable....
I have a bad 328 inner tie rod. It is for the early 328 with the old suspension geometry, it is therefor a shorter rod than the "88". It...
I have a Boxster S (pretty much same as cayman S) and a 328. I drive both hard and I believe the Boxster S will out handle the 328. The 328...
There may be other threads on the subject, but I just thought I would share my 10+ years of experience owning a 328. I finally got around to...
Now that my engine is back in, I am starting to tackle the "cheaper" things. I need to replace a front wheel bearing in a 328. I thought it was...
There is a known problem with 328's that I don't think was mentioned in the above posts. It has to do with the connector to the fuse/relay panel....
Hello, My engine is out of the car at the moment. The time consuming thing is waiting for the parts to get here, not doing the work. Before...
Anybody have specs on the 328 oil pressure regulator? I have the spring specs from the manual. But I am looking for the diameter of the plunger...
I need a recommendation on a good engine/machine shop in the south central PA area or within reasonable driving distance. I am going to rebuild...
Is outrun 2006 the first game with a 328? And what about games with the 308, are there any? What's the dilly? The 308/328 is the most mass...
I just put in an order for the parts. They will probably take a while to get here. The bearing is actually $120 a piece. So wow. Anybody have...
Hello again, I spent about three to four days getting the woodruff key out. There is next to nothing left to it. Mine is really soft metal....
Hi everybody. I just thought it was interesting that someone else was doing the same thing as me at the same time! I've been spending a 1/2hour...
