© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Does the 348 have a hydraulic clutch or cable? The 308/328 RHD with cable clutch have a cross-shaft to transfer motion from the pedal to the left...
I am wondering if this is similar to mine. When cold it runs at about 800 RPM and makes a "bag of nails" sound which appears to be coming from the...
Exactly this. I live in London and drive in Surrey/Sussex and there are so many Ferraris nobody takes any interest. What I drive my Lotus Esprit I...
The resistance value does vary per wire but doesnt really matter. But you would generally not use resistor extenders or plugs with resistance leads.
All true but there is more. If the suspension places any degree of axial twist on the bushes, the resistance to this can over-stress the mountings...
Unfortunately it's a Ferrari thing in general. The buyers of these cars didnt buy them to drive. They bought them as someone buys a piece of art...
Not sure I would agree. Mine is original and has a hardly-visible horse as have all the other originals I have seen. I would say a...
Yes they are self-colored, molded from black plastic.
Very early 308 tops are different, until there was a change to the front seal which required a different profile of the front edge of the top.
This thread is in the category for car-guy pub chat: "You'll never guess what someone suggested doing on a forum..." In fact I doubt whether many...
Crikey, didnt realise how unique the Aussie cars were. My assumption they were basically UK cars could not have been more wrong!
Thats only the part of it, the huge amount of offset added, plus lowering would make the thing bump-steer like crazy and have a huge scrub radius...
Agree! [ATTACH]
Question is, is there actually such a thing as an Aussie 328? I would have thought Aussie cars were identical to UK cars and went down the line...
I have seen at least 2 cars in the UK which have the early suspension but gaskets on the door handles and the later type of interior door handles...
Exactly correct. I dont see how any supplier can claim an unbonded bush (AKA a bearing) can mimic the suspension characteristcs of an OEM bonded...
No, they provide the fore-aft detent for the selector shafts. The lockout balls/plungers are elsewhere.
Owning a Lotus Turbo Esprit brings out some of the drawbacks of the 328: The GTS chassis is not very rigid and you can feel the car twisting and...
I would add a d: to the above list If the pump runs for a few seconds then stops as full pressure is reached too early, the accumulator has...
Be careful of the shims under the ABS sensor mounts. These set the very precise gap between the sensor and the toothed wheel. If mixed up (I did!)...