© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
Sounds like sticky relay somewhere
If your pump didnt prime the accumulator, it wont push the car into neutral, and car won't attempt to start. Which is probably why opening the...
How much would the carbon intake manifold be?
Check for vaccum line leak near the throttle bodies.
I had a slight leak near the MAF which caused it to have to restart twice and bounce the idle.
Where did you get the carbon gauge cluster surround?
I did the same thing. Wired the blue wire through the 360 modena sport switch. Flick down and valves remain open, flick back up and valves operate...
The AC controls have to be removed and separated. Behind the knobs there are small C clamps that hold them in place.
To remove the AC controls,...
Here you go:
Accessories & Tools for Ferrari 360, 430 & 458 - Superformance
MA Carbon Makes the trim:
F430 Steering Wheels (macarbon.com)
Yes it replaces the silver section. You pull hard and the silver section pulls...
If u lose a clip, u can use Honda Civic clips that hold the front H emblem.
As an update, I did end up getting the top speed exhaust for the F430 and welded aftermarket valves in.
I much prefer the sound and...
Does it happen between shifts or randomly?
I had intermittent flash before as well. One time was loose connector of the F1 sensor behind the...
Mase Engineering can tune out the cold start.
My car has 200 cell cats and no header cats. As soon as its cold started, it closes the exhaust...
200 cell cats will waken your car up!
I have the Scuding F1 relay installed in my car and had some questions regarding F1 pump prime cycles.
It seems in Gears 1-3 and neutral...
with the doors closed, lift up both lock buttons.
if u dont hear the doors lock or attempt to lock, theres ur microswitch issue.
Yellow area in Europe
Blue area in North America
As far as the above,
Is it normal for the pump cycles to be the following:
1- Engine off - 2 mins
2- Engine on in neutral - 15 seconds
Does anyone have a digram on which cylinder is located where?