© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
A woman walks by my 360 Spider and asked, "is that an engine in your trunk?"
I've experienced that on my 2003 360 Spider. I did an F1 fluid change and readjusted the PIS setting in order to fix the problem. Make sure the...
Just a side note. Do not turn the ignition key on/engine off while the air bag module is disconnected. Doing so will trigger the air bag light....
The OP got lucky because he was able to extinguish the fire just in time with little damage. Hopefully, the repair is not reported in CarFax. If...
I'm glad to hear that if your F1 and capote breaks down more often than usual, you'll gladly have it fixed. I like that spirit. Enjoy it with...
Do a search on F1 and capote issues on the 360 to come to your own conclusion.
All I can say is to think thrice before considering an F1 Spider 360. Seriously.
FYI. It cost as much as $35K to replace the whole convertible top assembly from the dealer.
- Top not operating smoothly or fitting flush
I think this is seriously worth looking into. Sounds like the capote is knocked out of alignment in...
I had a similar problem on my Volvo. I simply removed the vapor canister and gently pound it with my fist to loosen the charcoal inside. That...
Just to eliminate the easy stuff, start the car and operate the roof switch with the engine running.
Bad roof switch?
Looking forward to premature catalytic converter failure, anyone?
In CA we have blackouts when it gets too hot or the wind blows in the wrong direction. So EV replacing IC engines completely is a pipe dream until...
Does that mean the charging infrastructures and power grid will be able to handle ALL EVs within 15 years? Just asking for PG&E.
I'll take a wack at this ... bad engine mounts?
Neglected to add: do a visual and measure resistance on straps.
How 'bout making sure that you have good, tight grounding straps from the engine to chassis?
At this point, it doesn't hurt to check that all the electrical connectors are tight. The tech do need to disconnect them when pulling the engine...
Can you share the source for the mesh? Thanks.