© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
On our V8, the cam lobes are 90° apart on each camshaft. If you try to turn such a camshaft by hand (no belt), you will find that it can stay fix...
It's all due to where the cams stop in their cycle.
Depending on the stop position, the valve springs create a torque on each cam in one direction...
You have a PM.
Same for me. Great experience with Phil at R-Tuned.
I have for sale a Ferrari 360 instrument cluster.
It is in very good working conditions, including backlight. Only to mention 2 very small marks...
If you want to bleed the clutch only (ie. not the actuator) you don't need any tool at all.
Just start the engine !! That makes the TCU to open,...
EEPROM has not been read properly !!
From my experience, yes ! Better to check the tension at TDC. The tension in the different parts of the belt is very dependent on where the...
PM sent, Jonas.
None !! Number #4 is physically at TDC but not ready for leak down as valves are opened.
You will have to rotate the crank by 90° each time to go...
email sent !
Why would you want starting from a 430 TCU ? There are other solutions leading to the exact same result.
I can provide you with a TCU...
I can't PM you. Have you, in your profile, authorized PM from members ?
Except if you really want to remove the IMMO functionality from your ECU, there are other possibilities to make your 360 run again :
- if the...
If you have a CEL due to misfires, any OBD reader will tell you which cylinder is involved.
You should get P030x DTC, where x is the cylinder of...
Nothing wrong with your car.
As far as I have experimented, for the 360, these "cheap" diag tools are not able to connect to TCUs with a reference...
Before (it's a 220V version, not a 12V version)
Well done Lee !
Thanks for the pictures. First time I see one of these, Ferrari re-branded.