Weekly digest
© 2021 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
I agree with Privacy Policy
After reading that a lot of members have found their dizzies to be seized or rusty I decided to replace the bearings and lube the whole thing. I...
according to Fchat member Sowest it is a British Association thread 2BA pitch 0.81 diameter 4.7 TPI 31.4 angle 47.5º, I read this (After the...
A bit of progress, installed the clutch, it didn’t have much wear because this was probably replaced by the PO, I suspect it was rusted together...
Did the car ever have any backfires at some point? If so check the fuel dist sensor plate for flatness, mi 308 only idled at high rpm when warm...
You will not need the stereo on this car.
I’m not posting any candidates for this list because I’m mechanically inclined and I would probably be bedazzled by look of the mechanicals and...
Congratulations! Love this car (biased), like Albert wrote: ac evaporator could be hosting life on it.
Nice to see the action at the factory, but now I have to rest, I got a headache from the out-of-focus adornements and the music choice
Would you share the name of the spray you are using?
I thought it thru myself also, in a car with such a difficult to open engine lid a fixed engine bay installation was my choice, I just don’t see a...
Along the way I learned that threadlocker behaves the same, so if using threadlocker on “inactive” surfaces a primer is mandatory or no curing...
Loctite 518, this product is advertised as preferred on aluminium surfaces. I did the previous test using 518 and primer, It is very tick and...
I did some research and also some testing and some using, here’s what I learned on the various loctites: -I was concerned the 515 I used to mate...
Be careful not to be infected withd the new strain, it can develop into a very (financially) dangerous “anything on wheels” virus. I’ve been...
Coincidentally, a week ago I was invited to a car brunch, and someone said my 308GTBi was “the ugliest ferrari ever made”, adding “looks just like...
Thank you Jean, I will look for a thick plastic spoon for my tool pouch!
Like BigTex suggested I built my own plugs in aluminium, had some leather left from other repairs. I first inserted the plastic plug, it is tight...
The crankcase halves and transmission use sealer from the factory, so some tubes are probably around the engine manufacturing area. Keep in mind...
Did the cam degreeing thing, although I have the shims to adjust the gap to 0.5mm I decided to take the mathematical approach others have done and...
Slowly progressing: Had the flywheel resurfaced as it had rust marks, the markings didn’t match the AP clutch setup so I’m guessing the original...
