© 2020 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
That's for a 360 but should be similar on a Scud/430 cluster:
+30 is the nomalized name for wires and pin of connector directly connected to the battery (uninterrupted +12V)
+15 is the nomalized name...
Don't know, could be as simple as a voltage regulator which has failed.
First thing I would do is to check if battery voltage (+30) and switched...
From memory, the connector for the Sport switch is black, while the others are red and white.
Frome the wiring diagram, it has a Brown/White wire...
I have no experience with Leonardo and SD. At most a comparison of measurements on a CS with my Texa and with a SD (#100% on Texa and #75% on SD...
It's same thing ... but not measured at the same locations.
The travel of the pressure plate between new clutch and 100% worn clutch, which...
Mail sent ...
Yes, that's where I buy the replacement panels.
Never had an issue with them.
Awesome car , Trev !!!
Just to illustrate :
On the 360, the pulleys diameter ratio is such that when the engine is at 8500 rpm, the AC compressor is at 7500...
7500 max continuous speed is compressor rpm, not engine rpm. There is a slight reduction in between thanks to pulleys diameter.
Are you talking about marks at the other extremity of the camshafts ? Because the ones on the pictures are not very close.
Fantastic work Trev !!
As I am back in 360 world, I will contact you soon for some ECUs stuff ...
I visited their website but the full illumination panels they propose look blueish (as OEM 360), not white.
I'll ask them if...
I bought one, 2 weeks ago, and it has yellow varnish, not the yellow layer as on your picture. I will check with Prosport if they offer some...
They used to but I am not sure it is still the case.
Just a comment, if you put a white light panel (CS or 430 or custom) below the Prosport gauges, you won't get the CS look with white illumination...