Part request for 365 GT4 2+2 | FerrariChat

Part request for 365 GT4 2+2

Discussion in '365 GT4 2+2/400/412' started by judge4re, May 10, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. judge4re

    judge4re F1 World Champ

    Apr 26, 2003
    13,477
    Never home
    Full Name:
    Dr. Dumb Ass
    Okay, let's make full use of the internet. My mechanic has just given me the following list for the 365 GT4 2+2 (18759), and I'll open it up for bids from all of the suppliers out there. PM or email is fine. Let me know if you need any additional information.

    Thanks,
    Erik

    Front inner and outer wheel bearings and seals
    Front turn signal lights
    Spark plug wires
    Fuel and air filters
    4 Axle boots
    4 chrome knock offs for wheels
    Floor mat set
    Very small cloth lined hose - 12 feet
    Large cloth line hose - 12 feet
    Valve cover gasket set and o-rings
    Valve cover cap nuts - 40 and washers
    A/C receiver dryer and expansion valve
    New steering wheel or the name of a place that can replace the leather
     
  2. Texas Forever

    Texas Forever Seven Time F1 World Champ
    Rossa Subscribed

    Apr 28, 2003
    75,370
    Texas!
    One brief addition to this list from Erik's CFO --

    1. One fat bank account.



     
  3. Ferrari_UK_Parts

    Apr 28, 2004
    33
    UK
    Full Name:
    Stuart T.
    hiya erik

    jeff has asked me to come back to you with some prices for your car;

    inner wheel bearings £14.10
    outer wheel bearings £10.40
    turn signal lamps = no stock
    spark plug leads £77.10
    fuel filter £6.50
    air filter £78.90
    axle boot £8.40
    knock off = no stock
    floor mat = no stock
    please comfirm which hose you require
    valve cover gasket £12.20
    valve cover nuts 1.40 ea
    valve cover washers 6p ea
    A/C dryer £44.60 (no stock of valve)
    steering wheel = no stock

    hope this helps, any probs feel free to contact jeff or myself

    thanks
    stuart (ferrari parts dept)
     
  4. judge4re

    judge4re F1 World Champ

    Apr 26, 2003
    13,477
    Never home
    Full Name:
    Dr. Dumb Ass
    Stuart:

    I believe he's looking for the fuel hoses. We're working on replacing all of the cloth covered lines on the car. If you've got a per foot or per meter price for all of them, let me know. I'm 7000 miles away from you guys in the UK and the car is 8000 miles away from me.

    Thanks for the quick response, I'll be in touch with you guys shortly.

    Cheers,
    Erik
     
  5. Ferrari_UK_Parts

    Apr 28, 2004
    33
    UK
    Full Name:
    Stuart T.
    hi erik

    the only bore sizes we do off the roll is the following, otherwise we have it pre-cut, depending on exact length and bore size...

    5mm £6.20 per metre
    7.5mm £9.80 per metre

    we have both of these sizes in stock

    thanks
    stuart
     
  6. judge4re

    judge4re F1 World Champ

    Apr 26, 2003
    13,477
    Never home
    Full Name:
    Dr. Dumb Ass
    I sent Jeff an email last week with all of the info. Haven't seen a reply yet. Did you guys get it???
     

Share This Page