Looking to rent/borrow torque tool for F355 head nuts - let me know if anyone has one Thanks
https://shop.snapon.com/product/Standard-Models-2%-Accuracy/Fixed-Head/1-2"-Drive-Fixed-Head-Techwrench-Torque-Wrench-(12.5–250-ft-lb)/TECH3R250 https://www.ricambiamerica.com/95972906-head-torque-tool-for-f355.html These guys sell them all day long.
DM me. If in US we can set up a loan. I bought the ricambi tools, both that extension and the loop that wraps around the head. Not using ATM.
for Canada, is more economical to buy it new, unless another Canadian on this thread has one for you. Once you hit international shipment (personal) the price in shipping alone isn't worth it.
You dont need the tool to take the nuts of the studs. Use a good quality 15mm ring spanner. You only need the tool to give you the correct initial torque figure when resembling the heads, Then to get the next step of applying the angle either use the tool or again the ring spanner. It's not a big angle.
