360 conversion | Page 54 | FerrariChat

360 conversion

Discussion in '360/430' started by RANDY6005, May 19, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Almost done with cleaning engine and F1 trans you can only do small sections at a time for best results.
    Next pulling all the old steel fasteners replace in Titanium should look a hell of allot better wend all done.
     
  2. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  3. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    No rusting or corrosion !!
     
  4. Topace

    Topace Karting

    Apr 2, 2021
    118
    Omaha ne
    Full Name:
    Thomas
    I hope you’re keeping a list for us so we could just order the titanium bolt package
     
    clean512 likes this.
  5. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    Right that would be nice
     
    Mel Spillman likes this.
  6. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Pulled and weighted engine mount sending out to have made in Titanium .
     
  7. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    having spacer made as well ,
     
  8. Topace

    Topace Karting

    Apr 2, 2021
    118
    Omaha ne
    Full Name:
    Thomas
    randy maybe you should just get a swiss screw machine. Then you can make the parts for all of us.
     
    RANDY6005 and clean512 like this.
  9. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Cost 400.00 setting up charge biggest cost then maybe each bolt 55.00
    Might as well make a few extra ones
     
    clean512 likes this.
  10. Topace

    Topace Karting

    Apr 2, 2021
    118
    Omaha ne
    Full Name:
    Thomas
    looks to me like a standard size bolt m16 1.5 120mm should be a easy find in titanium. Maybe have to change to a m16 2.0 120mm. Are u looking for Grade 5?
     
    RANDY6005 likes this.
  11. 2008F430

    2008F430 Karting

    Apr 30, 2020
    106
    St Augustine
    Your going to need some tie down straps to keep that thing from blowing away if you get it much lighter.


    Sent from my iPhone using FerrariChat.com mobile app
     
  12. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    veilstylez likes this.
  13. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    already have them but thanks
     
  14. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Where would you find that bolt ? maybe better deal than what my guy wants to charge ?? Any info would be great !
     
  15. Topace

    Topace Karting

    Apr 2, 2021
    118
    Omaha ne
    Full Name:
    Thomas
    I found some when I was searching. But I just got my phone replaced. I think the one I found was m16 2.0 by 120mm grade 5 the big disk is easy to make I have a small lathe I make small parts all the time.
     
    RANDY6005 likes this.
  16. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Going to make a few more passes with NAPA Aluminum bright you can see the places missed, hard to tell wend every thing is still wet after drying you see the dirty parts missed.

    For best result use a garden sprayer use distilled water and rinse and rinse and keep off steal metal parts.
     
  17. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Hell of a difference
     
  18. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Pulling valve covers next
     

Share This Page