What A-Arms Are These? | FerrariChat

What A-Arms Are These?

Discussion in 'Technical Q&A' started by nickm, Mar 2, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. nickm

    nickm Formula Junior

    Jan 20, 2004
    371
    Ventura Ca.
    #1 nickm, Mar 2, 2021
  2. nickm

    nickm Formula Junior

    Jan 20, 2004
    371
    Ventura Ca.
    #2 nickm, Mar 2, 2021
  3. mechaniker

    mechaniker Formula Junior
    Owner

    May 30, 2004
    567
    Germany
    #3 mechaniker, Mar 3, 2021
    I would guess for an early Monodado Testarossa..
     
  4. Ferrari Tech

    Ferrari Tech Formula 3

    Mar 5, 2010
    1,126
    Georgia
    Full Name:
    Wade Williams
    #4 Ferrari Tech, Mar 3, 2021
  5. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,124
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #5 Steve Magnusson, Mar 3, 2021
    Last edited: Mar 3, 2021
    +1 -- and, maybe, either ones with design improvements done by Ferrari along the way, or aftermarket ones, as the smaller front? pieces seem to have some added/different gusseting where they might crack/break (and a slightly different tube configuration) compared to the SPC figure (which is done very early in a model's life and never updated ;)):
    Image Unavailable, Please Login
     
  6. nickm

    nickm Formula Junior

    Jan 20, 2004
    371
    Ventura Ca.
    #6 nickm, Mar 3, 2021
    For sure the one pair is the rear lower Testarossa. The front ones I can't quite place yet. Will look at the early Monodado Testarossa.
     

Share This Page