458 - Scud shield | FerrariChat

458 Scud shield

Discussion in '458 Italia/488/F8' started by chenging_r8, Feb 9, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chenging_r8

    chenging_r8 Rookie

    Jul 15, 2020
    19
    Full Name:
    Chris
  2. ShadowLAP

    ShadowLAP Formula Junior

    May 15, 2017
    544
    SW Suburbs of Chicago, IL
    Full Name:
    Lawrence P.
    Can he give you the sizes. That would make the question much easier to answer.
     
  3. chenging_r8

    chenging_r8 Rookie

    Jul 15, 2020
    19
    Full Name:
    Chris
    This is what he put for sizes

    measure cm. 10.05x8.5 .
    Glazed metal, heavy , thickness mm. 4
     
  4. ShadowLAP

    ShadowLAP Formula Junior

    May 15, 2017
    544
    SW Suburbs of Chicago, IL
    Full Name:
    Lawrence P.
    I measured the shields on my 2015 458 Spider (a couple of times) at the measurements that I have are 10cm x 8cm. I could not measure the thickness.
     
    chenging_r8 likes this.
  5. chenging_r8

    chenging_r8 Rookie

    Jul 15, 2020
    19
    Full Name:
    Chris

    appreciate it. If his measurements are correct, then it doesn't seem like it'll fit. Bummer
     
    ShadowLAP likes this.
  6. ShadowLAP

    ShadowLAP Formula Junior

    May 15, 2017
    544
    SW Suburbs of Chicago, IL
    Full Name:
    Lawrence P.
    I measured multiple times all up and down my shields and did not get any measurement to 8.5cm. The height seems correct. You might want him to remeasure.
     
    chenging_r8 likes this.
  7. BruceC

    BruceC Karting
    Silver Subscribed

    Apr 26, 2018
    249
    Tucson, AZ
    I'd be careful about not getting the exact P/N shields. I sent my F430 shields off for a custom enamel finish. This individual took so long that I demanded he return my shields, which he had already stripped, so he replaced them with shields supposedly from a salvaged F430. They "looked" just like my originals, but when I tried to fit them, the curvature didn't exactly match the fenders causing the shields to rock back and forth a little. I shopped around and purchased new shields from Eurospares for what I thought was a reasonable price.
     
    chenging_r8 and ShadowLAP like this.
  8. chenging_r8

    chenging_r8 Rookie

    Jul 15, 2020
    19
    Full Name:
    Chris
    i didn't even think of that curvature. Yeah prob not worth the risk without the part number. Thanks again guys for helping out
     
  9. chenging_r8

    chenging_r8 Rookie

    Jul 15, 2020
    19
    Full Name:
    Chris
    Bump. Trying to get rid of these. Open to Anything reasonable
     

Share This Page