I've got a Launch X431 Mini ProS with Ferrari V10.95. Trying to do a clutch bleed. I'm using the following steps but can't see a clutch bleed option: Diagnose Ferrari 430 EVO8 F131E EVO8 Gasoline System Selection Marelli Semi Automatic Gearbox System CFC301 Special Function There is no clutch bleed option in the subsequent screen. Could I ask for a bit of guidance. Is there another menu I should be following? Thanks, James
Do you see it on another ferrari or maserati (the QP uses the cfc301). Sometimes the menus are inconsistent between models. Sent from my SM-A515W using Tapatalk
The scuderia is the elp option and as mentioned check special functions under the 231 version under elp Sent from my moto g(7) using Tapatalk
Just a fyi .. 10.95 seems to have added the ediff functionality that was missing on the tool. I haven't tried it but I figured I let you know it is there Sent from my moto g(7) using Tapatalk
Thanks for the replies. I'll give it a try. Flash...that's good to hear it may support E Diff bleeding.
Yeah it seems the F1 bleed and the actuator bleed are the same function, run pump for X seconds. It is a super easy process once you get the under body panels off. I did see the e-diff but skipped it since my fluid came out bright red and my clutch is only worn 9-10% so guessing a clutch swap and fluid was done sometime recently.
The X-431 will run the pump for I think 30 seconds. It says how’s long the pump will run on the X-431 screen. I ran it once, refilled the reservoir, then ran it a second time and refilled the reservoir. The fluid came out bright red. I’m using Mobil 1 synthetic auto trans fluid. Like mentioned above, it was really easy. Daniel on You Tube demonstrates it in his video, and I just followed along. Sent from my iPhone using FerrariChat.com mobile app
James, does the new software version allow keys to be programed? Previous versions didn't have the option.
Someone shared a procedure where 16 key presses put the car into a learning mode. Then a unlock on the new key, then ignition turn with old key Is that for programming new remotes or just getting already synced ones to "wake up"
Someone posted that worked on a 360. Another tip was that if the car locked with the new key press that you need to manually unlock with a key and not press the old fob before turning on the ignition.
Thanks all. Using 430 ELP got me to the clutch bleed procedure. I ran it twice. Each time it bled 100ml of fluid. Does this sound correct? I was expecting more. Also, I thought I read somewhere that the Scuderia was EVO8 rather than ELP. Is this true? Is it just that the clutch bleed routine wasn't put in all sections? Marco, I have to be connected to the car to see what other functions are available. I'll check this weekend.
That amount of fluid sounds correct. Just keep doing it until the fresh fluid comes out the bleeder hose. Sent from my iPhone using FerrariChat.com mobile app
Would the key programming be under the Bosch Immobilizer System? If so I just checked that function and it doesn't do anything, at least with my car.