Can someone tell me how to remove instrument housing please. Bought new gauges. Image Unavailable, Please Login Image Unavailable, Please Login Sent from my iPhone using FerrariChat.com mobile app
Each one plugs in under the dash. The outer cover of each gauge comes off so you can unscrew/screw the gauge in. Be sure to do one at a time so you plug them in the correct plug. I did my new speedo when I had the dashboard off and that's how I remember doing it.
Yea I could easily get the speedo and tach out but not the smaller gauges. I think they’re held in by a nut, tomorrow will try again and try and unscrew the nut from back of each small gauge while I have the big gauges out. If my hand will fit in there....
watch the little gauge circuit boards,, on the bottom gauges,, It protrudes out the bottom of the trim/support plastic. SNAP,,, it you will. Repair or you will. ,,, grasshopper
Ok thanks. Tried to get them out, no luck. Going to have to remove steering wheel and steering column plastic surround to get to the bottom nuts on instrument housing.
you might not need to do that. ... if you tilt the top of the panel,, with the 4 gauges foreword. Remove the steering wheel ,, 5 nuts. good luck.
I believe,, the repair is pretty simple. Just look for screws after you pop off the front trim panels,,, gently,,get them out. First remove your speedometer and tach,,, of corse.