My passenger side window in my 95 456 GT was going up all the way, but not dropping when the door was open. I used the key reset found here to get the drop to return: https://www.ferrarichat.com/forum/threads/456-auto-window-drop-door-open.488192/ However, once the auto drop started working again, the window does not go up as high as it did when the drop was not working. I tried resetting the window ECU using this thread: https://www.ferrarichat.com/forum/threads/456-window-ecu-reset.507617/ However I cannot get the window to go high enough to create a good seal. Again, before trying to reset things via the key in the door or at the window ECU, the window was going high enough to create a decent seal, it just wasn't auto dropping. So basically this morning I had a window that was definitely high enough, but not auto dropping and now I have a window that is auto dropping but not high enough (does this sounds like a vintage Ferrari story yet?) Is there a sequence to the reset procedures so that the window relearns the upper limit AND the auto drop feature?
