360 - Brakes and Rotors | FerrariChat

360 Brakes and Rotors

Discussion in '360/430' started by Jhills14, Jul 7, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jhills14

    Jhills14 Karting

    Feb 3, 2020
    64
    Georgia
    Full Name:
    James Hills
    I don’t like to create duplicate threads but when I searched some of the threads were old and the links no longer exists so...

    Where are you 360 owners buying your brakes and rotors from?

    Thanks in advance!


    Sent from my iPhone using FerrariChat.com mobile app
     
  2. BrettC

    BrettC Formula 3

    Aug 13, 2012
    1,970
    Calif
    Full Name:
    Brett
    Tried Girodisk track/street pads....lots of squealing. Went back to stock.
     
    Jhills14 likes this.
  3. Jhills14

    Jhills14 Karting

    Feb 3, 2020
    64
    Georgia
    Full Name:
    James Hills
    Good to know!


    Sent from my iPhone using FerrariChat.com mobile app
     
  4. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    I had some custom 2-Piece Rotors made.

    Sized up to 350MM up front, kept 330MM in the rear.

    And I run Endless MX-72+ Brake Pads. Great bite, dust...is fair, and not really any squealing, maybe a hair when it's cold, but the moment it warms up, they're great.
     
  5. Need4Spd

    Need4Spd F1 Veteran

    Feb 24, 2007
    6,644
    Silicon Valley
    I’ve gotten my brakes from Dave Zeckhausen forever, all my cars. https://www.zeckhausen.com/catalog/index.php?cPath=230_995
    I have a set of StopTech drilled rotors (floating pins) and use StopTech sport pads. I’m told the rotor hats are NLA, but Dave managed to find me a pair to match my fronts. I also have stainless braided lines. Stopping is powerful even when cold, and no fade, even in moderate track use. Moderate dust, lower than OEM.

    They are also quiet. The key to getting these brakes quiet is to have true rotors. Unlike floating calipers found on many cars, the Brembos are fixed and the vibrations from a slightly out of true rotor makes a lot of noise. So if you re-use your rotors, you need to true them with new pads or else they will squeal.


    Sent from my iPad using FerrariChat
     
    Jhills14 and tifosi101 like this.
  6. RedNeck

    RedNeck F1 Veteran
    BANNED Silver Subscribed

    Jul 8, 2016
    9,875
    The CSA
    Full Name:
    Me
    Jhills14 likes this.
  7. Jhills14

    Jhills14 Karting

    Feb 3, 2020
    64
    Georgia
    Full Name:
    James Hills
  8. RedNeck

    RedNeck F1 Veteran
    BANNED Silver Subscribed

    Jul 8, 2016
    9,875
    The CSA
    Full Name:
    Me
    They have the rotors (discs), OEM Brembo
     
    Jhills14 likes this.
  9. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,088
    Houston
    Full Name:
    One4torque
    You can spend 3-4x at the wrong place for this service.

    so a little leg will save big $ on the stock brake service
     
    Jhills14 likes this.
  10. Jhills14

    Jhills14 Karting

    Feb 3, 2020
    64
    Georgia
    Full Name:
    James Hills
    For sure doing it myself!


    Sent from my iPhone using FerrariChat.com mobile app
     
  11. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,088
    Houston
    Full Name:
    One4torque
    The stock 360 rotor pads are very inexpensive. Nice diy savings here.
     
  12. Jhills14

    Jhills14 Karting

    Feb 3, 2020
    64
    Georgia
    Full Name:
    James Hills
    So you just order them from your local Ferrari dealer?


    Sent from my iPhone using FerrariChat.com mobile app
     
  13. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,088
    Houston
    Full Name:
    One4torque
    Ricambi

    And others

    will be best pricing



    I encourage you to get quotes for parts from your dealer vs on line. Then smile as you diy w savings. Take the misses out for a nice meal on the savings.
     
    Jhills14 and Need4Spd like this.
  14. CCRider66

    CCRider66 Formula Junior
    Owner Rossa Subscribed

    Jul 29, 2014
    454
    Sussex, WI
    Full Name:
    Brian
    I run PFC Brakes and rotors. I have two sets of pads. 1 daily, 1 for track. Track will give a little noise driving daily.
    I run their front 2pc rotors.
    Changed when I purchased the car 5 years ago and I might have to get some new stuff next year. Turning 34,000 in a few weeks.
     
    Jhills14 likes this.
  15. Jhills14

    Jhills14 Karting

    Feb 3, 2020
    64
    Georgia
    Full Name:
    James Hills
    Thanks. Do you mind me asking what they ran you?


    Sent from my iPhone using FerrariChat.com mobile app
     
  16. BrettC

    BrettC Formula 3

    Aug 13, 2012
    1,970
    Calif
    Full Name:
    Brett
    Scuderia Parts are good pricing....
     
    one4torque and Jhills14 like this.
  17. CCRider66

    CCRider66 Formula Junior
    Owner Rossa Subscribed

    Jul 29, 2014
    454
    Sussex, WI
    Full Name:
    Brian
    I'm sorry, that was 4-5 years ago. They were not bad, normal track car pricing I remember. Nothing even close to the Ferrari stuff.

    But they were well worth the money, I don't think I'll need to do anything with the brakes till next year at the earliest.
     
    Jhills14 likes this.

Share This Page