How did this end up in the cross reference thread?
Rock Auto Volvo 271-664 OEM; Includes Gasket or Seal MAHLE® thermostats provide world class temperature control and are trusted by OEMs & Technicians around the globe. When purchasing a MAHLE thermostat, you know you're getting quality guaranteed by MAHLE. Demand the best, demand MAHLE. Type Thermostat Insert Gasket or Seal Included Yes Start to Open Temperature 92 Deg. C Alternate/OEM Part Number(s): 271417, 271664, 2716640
Found the Gripper DIFF maker in England ! https://gripperlsd.com/ (Dino, 330 and 512 ...look all the same to me in their photos ) Phill stopped selling them because he went to Singapore or Hong Kong. But Gripper is still produce this immaculate TR and 512TR diffs for very good prices (UKP 1700) and gives life-long guarantee still. Ask them simply for info. You need two Timken bearings and a shimm-kit. Image Unavailable, Please Login Image Unavailable, Please Login
thank you mel for this info exactly working as phills diff with the overrun side ramp. when back in germany hopefully the next 2 weeks I will order one there is no complete kit available and if so then not payable
Half shafts / Axle Shaft (Part # 116016) As per previous posts by others the CV joints for the half shafts are the same as Porsche 930 CV joint with many good and cheap aftermarket CJ joints available. I also needed to replace both half shafts on my Testarossa. Rather than paying ~1,000GBP each for Ferrari half shafts I found that I could order custom half shafts with the same Porsche 930 / 28 splines that are made for high horsepower offroad racing applications (that often use this Porsche 930 spline) that are stronger and made from better alloys than the OEM part. I measured them up and had them cut to the same length using 300M alloy. The pair ended up costing $770 for the pair ($385 each compared to 1000GBP each). Cheaper 4340/chromoly ones are also available but I opted for the stronger 300M option. For 300M they will usually be supplied unpainted (to facilitate crack testing for racing applications) so I had to paint them. The final product seemed much better than the OEM ones they replaced. I ordered mine from Kartek.com in the US and was happy with their service. Another supplier is swayaway.com
Mirror switch for Testarossa equals switch in Land Rover Discovery/Freelander - part nr. AMR2498. NB ! There are two versions of this switch - foldable and normal mirrors. Image Unavailable, Please Login Image Unavailable, Please Login
SPEED SENSOR REPAIR. PART 116987 very useful info on testing and repairing speed sensor http://www.dinoplex.org/instruments/vegliaspeedosensor/
I think these will do it... but have not seen them in person. I can verify personally that the air pump body (not nozzle) is the same. Image Unavailable, Please Login
That's my fault. I misread the ARP PN from the pic in another thread -- should've written: Ferrari PN: 104310 Crown gear securing screw ARP Part #203-2802
Hi I have 1991 Testarossa RHD Any cross-reference part for 1) Valve guides 2) Valve seals 3) standard piston rings
Hello, any cross reference part for the oil preassure sender ? Superformance is out of stock . It is a M18 . Maybe something from VDO ? Thanks
Gearbox oil drain plug copper washer 10265160 Bel-metric GCA36x42 - copper hollow crush gasket https://www.belmetric.com/hollow-crush-gaskets-c-11_94/gca36x42-copper-hollow-crush-gasket-p-9208.html OEM: 36.6mm x 41.1mm Bel-metric: 36.74mm x 41.8mm
I thought I would contribute what I found if anyone is looking for fuel injectors for the Ferrari 512TR. Long time ago, I had an injector go bad and had them cleaned and bench flowed. The shop told me they were 19lb high impedance injectors. I must have lost my injectors so I had to find replacements. The Bosch orange top injectors have worked fine for over a decade. It was really close to the OEMs. I think it flowed 195cc/min and high impedance. I had them on the 512TR for over a decade and seems to work fine. The O2 sensors will trim the fuel delivery when needed. Recently I was talking to RC Injection and they told me the 19lb injector I have will be fine but they make some that are about 5-10cc closer to the OEM. I was told the stock injectors on the Ferrari 512TR are saturated (high-impedance, 16 Ohm) units that flow approximately 200 cc/min at 43.5 psi of fuel pressure. They make the SL4-0205 RC injector that will work on the 512TR. About $79 a piece new with warranty. I am going to order 12 of them just to get closer to OEM but the guy at RC said what I have (Bosch 19# orange top injector/high impedance) is probably fine. SL4-0205 Saturated Injector for Ferrari and Diablo. Flow Rate - CC's: 205 CC's / MIN @ 43.5 PSI Flow Rate - LB's: 20 LBS / HR @ 43.5 PSI Thought I would pass a long.
Does anyone have a cross reference for front and rear side marker lights on a US car? I find it hard to believe it’s Ferrari only but I could be wrong. Image Unavailable, Please Login Image Unavailable, Please Login Sent from my iPad using FerrariChat.com mobile app
Here’s what I found from the part numbers. Alfa Romeo GTV-6 Maybe only the lenses is the same. I don’t know if they mount the same. I’ll be in the garage tomorrow so I will look. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Sent from my iPad using FerrariChat.com mobile app
As a replacement for the large zip ties in the 1986 TR engine bay, I came across a nearly identical zip tie generically called a double locking cable tie or a double lock zip tie. I purchased what is called a "collar double head cable tie" made in Italy by SapiSelco. The only markings on the original F tie is the trade name COLSON on the top of the lock, which this does not have. The supplier was AutomationDirect.com in Atlanta, Ga. Their part number for this cable tie is COL.3.322 shown in the pic below. EDoug Image Unavailable, Please Login Image Unavailable, Please Login
Hi guys, do you know if there is cross reference for driver seat belt buckle? Am looking Euro specs, I don t know if same for US version. My Testarossa is '87. Thanks in advance
Fuel pump - MAGNETI MARELLI 313011300019 - about 35 euros • OEN 893 906 091 B — AUDI • OEN 69435 — BOSCH • OEN EKP-3-D — BOSCH • OEN 119291 — FERRARI • OEN 121727 — FERRARI • OEN 53719568 — FIAT • OEN 1613157 — FORD • OEN 6106539 — FORD • OEN 6150295 — FORD • OEN 82GB 9350 AA — FORD • OEN 83BB 9350 AA — FORD • OEN 84BB 9350 AA — FORD • OEN 002 091 59 01 — MERCEDES-BENZ • OEN 002 091 88 01 — MERCEDES-BENZ • OEN 002 091 97 01 — MERCEDES-BENZ • OEN 003 091 53 01 — MERCEDES-BENZ • OEN 116 090 00 50 — MERCEDES-BENZ • OEN 116 091 03 01 — MERCEDES-BENZ • OEN A 002 091 59 01 — MERCEDES-BENZ • OEN A 002 091 88 01 — MERCEDES-BENZ • OEN A 002 091 97 01 — MERCEDES-BENZ • OEN A 003 091 53 01 — MERCEDES-BENZ • OEN A 116 090 00 50 — MERCEDES-BENZ • OEN A 116 091 03 01 — MERCEDES-BENZ • OEN 721 1 49 099 2/1 — PUCH • OEN 893 906 091 B — VW • OEN 893 906 091 E — VW • OEN 8G0 906 091 A — VW
Image Unavailable, Please Login Upper Ball Joint : Corteco 49395927 Image Unavailable, Please Login Lower Ball Joint : Corteco 49395926