355 Steering Rack bolt sizes | FerrariChat

355 Steering Rack bolt sizes

Discussion in '348/355' started by jjtjr, May 29, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jjtjr

    jjtjr Formula Junior

    Aug 29, 2016
    668
    Vermont
    Full Name:
    john truskowski
    Just wondering if anyone knows what the size of the allen bolt heads are on the 355 steering rack. There are 2 that hold a little plate on to the side of the rack near the spool valve area. There seems to be a tiny bit of fluid seeping from that plate, but I cannot get at it by removing the rubber filler from inside the car. If I knew the exact size, I could bend an allen wrench and possibly get at it from underneath the car and see if I can tighten them. It is just a slight seep that I've been keeping my eye on, and it never seems to develop into a leak. I also do not feel its worth it to remove the rack for this considering the amount of seeping it has at this time. Any help would be greatly appreciated!
     
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,661
    San Carlos, CA
    Full Name:
    Mitchell Le
    Qavion likes this.
  3. jjtjr

    jjtjr Formula Junior

    Aug 29, 2016
    668
    Vermont
    Full Name:
    john truskowski
    Hey Thanks! That is exactly what I needed.
     

Share This Page