What's better than a little bit of Carbon Fiber? A lot of it! | FerrariChat

What's better than a little bit of Carbon Fiber? A lot of it!

Discussion in '360/430' started by becausephilchow, May 17, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    So, the one thing that I had not done yet on my 360, was tackle the interior. Other than throw in a pair of 458 Carbon Seats, the interior was stock otherwise.

    Ordered all the Interior Pieces from my good friend R-Tuned! Already had the Mirrors and Rear Window Lovures already, but essentially every piece on the Interior will be Carbon, and then the 458 Seats, along with the Interior and Ferran Automotive Roll Cage, will be wrapped in Black Alcantara. Slippery slope, but...so far in, might as well get it all done!

    Also full Carbon Engine Bay and covers too.

    Will keep everybody updated!

    For anybody that's interested in any CF Pieces for the 360 or F430, can shoot me a PM!
    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Wow I'm dieing to see how this turns out I have been eying those door panels.
     
  3. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    May be another few weeks, as car is on the lift, with the engine out. Waiting for parts from Italy, haha.
     
    02360spider likes this.
  4. BrettC

    BrettC Formula 3

    Aug 13, 2012
    1,970
    Calif
    Full Name:
    Brett
  5. BrettC

    BrettC Formula 3

    Aug 13, 2012
    1,970
    Calif
    Full Name:
    Brett
  6. FlyingHaggisRacing

    FlyingHaggisRacing Formula 3

    Jul 2, 2013
    1,368
    @becuasephilchow

    LOL, it was my car that provided Rich with the parts for the molds for the ...
    1. Steering binnacle
    2. CS interior sills
    3. The door interior upper quarters.
    4. The door interior handle trays.
    5. The panels either side of the exhaust
     
    Al Casteen likes this.
  7. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
  8. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    Nice! Yes, it definitely is a lot, which is why the rest of the interior will be going full Black Alcantara to make it flow better!

    Very nice!

    Rich says hi, haha.

    I'm hoping that the car is finished in the next month or so. Some pieces should be going out for the interior soon!
     
  9. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
  10. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    Im curious as to what the carbon doors will look like
     
    Performify likes this.
  11. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    Its gonna look great I follow you on IG
     
  12. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    Slowly installing some parts! Had to wait for a few more parts.

    Everything should've arrived by now, hopefully finish the Engine and everything related to the engine bay by the end of next week, and then off to the interior shop to get everything redone!

    Fully Cerakote Ceramic Coated IPE Exhaust
    RMR Challenge Intake Vent/Tubing
    RTuned Carbon

    Lots more to come!

    Can see the Ferran Automotive Roll Cage peeking through the rear glass too!


    Image Unavailable, Please Login
     
    Performify and RANDY6005 like this.
  13. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    Welding in the mounts for the Roll Cage.

    Popping in the CS TCU, and then setting the PIS afterwards. And then off to Interior to get it fully done! Will look like this afterwards!

    Alcantara everywhere, with the jersey material for the centres.

    Roll Cage, Headliner, Dash, Seats, Arm Rest, Behind the Seats, Sunvisors, etc.

    And then will be getting the wheel done in Carbon/Alcantara too!

    White stitching with a white Cavallino on the seats to match the wheels.
     

    Attached Files:

  14. Performify

    Performify Formula Junior
    Rossa Subscribed

    Jan 4, 2020
    371
    Sarasota, FL
    Full Name:
    Eric
    Looks great Phil.

    My own R-tuned CF order is inbound, will share when it arrives, can't wait!

    Thank you again for the recommendation and referral over to them.

    Anyone here considering any CF goodies, drop Phil a note and he can help with an introduction...
     
  15. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Show me the door panels already im dieing lol.i need to see them installed.

    Sent from my SM-N975U using Tapatalk
     
  16. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    I also did the rmr intake definitely a good and cheap mod. Image Unavailable, Please Login

    Sent from my SM-N975U using Tapatalk
     
  17. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    Let me get a photo for you! Saw the car for the first time since I dropped it off months ago. Buttoning up all the carbon install, and then testing to ensure no leaks and everything works and it goes to the interior shop right after. Hopefully have it all back for some real photos after a full detail in the next month or so!
     
  18. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
  19. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    clean512, brookliner7, S F and 4 others like this.
  20. Penzinger

    Penzinger Karting

    Jul 13, 2019
    135
    Austria
    Full Name:
    Heinz
    Well done! But what I like best is the miracle tree. Do you also have a fox tail for the ignition key?
     
    Performify likes this.
  21. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    I love it

    Sent from my SM-N975U using Tapatalk
     
  22. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    Now that is bad ass. Great job on this
     
  23. SRLC716

    SRLC716 Formula Junior
    Silver Subscribed

    Sep 15, 2019
    285
    Buffalo
    Full Name:
    Sam
    Looking sharp Phil!


    Sent from my iPhone using FerrariChat
     
  24. RaceMX-M3

    RaceMX-M3 Formula Junior
    Owner Silver Subscribed

    Dec 15, 2010
    523
    Frisco, TX
    Full Name:
    Scott
    Looks awesome, love CF. :)
     
  25. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    Some more photos...

    Car is back in the shop after the interior to button up a few things. Waiting for my new CF Dashboard Light Switch and Mirror Switch Panel, should be sometime at the end of next week.
     
    Performify and brookliner7 like this.

Share This Page