Roberto made a very nice replacement vent window frame but I cannot figure out how to get the old one out. Can anybody tell me how? Image Unavailable, Please Login Image Unavailable, Please Login
I admittedly don’t have firsthand experience with this subject on Dinos, but have done similar work on The item on second photo appears to be retainer channel for the vent glass (rubber) seal, not the vent glass frame and if so, to replace it, you may need to remove the drop glass first to get the vent window support structure out ...
Have done this several times but a long time has passed in between! Seems to recall you have to remove the main glass panel which then allows you to unbolt the main upright window channel. Be careful not to scratch the glass, its not easy to get out Tony
Edit: I apologize for my earlier post which apparently came out incomplete. Here’s version I likely meant to say:
6mm slot screw on forward edge at internal face of the door, two 10mm nuts along vertical frame EDIT: Mine is a GTS, yours appears differently
Unless you're fully confident with your own abilities/skills, don't have easy access to someone experienced and can live with the issue, this might be smartest approach