Greetings All, I've 'Searched' to no avail, so I'll toss it out to the group: I am looking for the ID/OD of the heat exchanger oil lines for a non-a/c Tipo E. I am aware that there are fine products from several vendors out there. However, I have the opportunity to rebuild mine using my old fittings plus new hose and crimp rings/collars. I can certainly remove and measure the ones on my car but I had hoped to order the new components now and minimize the down-time later. Thanks, in advance! Coop
Coop, Looked at a bunch of my original hoses and almost all of them had GATES GP120 16MM. Found this: https://www.gates.com/de/en/fluid-power/industrial-hose/general-purpose/premium-gp-master/p/3205-000000-000001
Just pointing in the general direction. I didn't find the Gates GP120 specifically. Products by category>fluid power>hydraulic hose and couplings. Maybe call Gates tech support. Angst+Pfister has a great catalog online but no US distributors.
Interesting, but how will you do this? Perhaps straighten out the prior crimp and re-use that old fitting... For the Dino A/C project I bought the hydraulic crimper with several dies, I'll bet it is the same and I could make my own. I have saved two removed OEM sets from 05082, 05702 in a box somewhere, but I can not seem to put my hands on them right now, I'll keep looking.