Ferrari 246 dino front windscreen chome surround. | FerrariChat

Ferrari 246 dino front windscreen chome surround.

Discussion in '206/246' started by JAMES NICHOLSON, Feb 10, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JAMES NICHOLSON

    JAMES NICHOLSON Karting

    May 22, 2019
    84
    Full Name:
    JAMES NICHOLSON
    Can anyone help?
    I am looking for a Dino 246 front "chrome" windscreen surround.
    I live in the UK.
    James.
     
  2. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,409
    Germany
    Full Name:
    Matthias
    contact Roberto Brandoli
    https://www.brandoli.it/en/who-we-are/
     
  3. JAMES NICHOLSON

    JAMES NICHOLSON Karting

    May 22, 2019
    84
    Full Name:
    JAMES NICHOLSON
    Thankyou.
    Awaiting reply from Brandoli.
    Regards.
    James.
     
  4. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,649
    Southern California
    My suggestion is to use Google translation to write them in Italian. A while back I wrote them multiple times in English with no response. As soon as I sent them an email in Italian, instant response!
     
  5. JAMES NICHOLSON

    JAMES NICHOLSON Karting

    May 22, 2019
    84
    Full Name:
    JAMES NICHOLSON
    OK, will do.
    Regards,
    James.
     
  6. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    3,811
    Norfolk - UK
    Full Name:
    Tony
  7. racerboy9

    racerboy9 Formula 3
    Silver Subscribed

    Nov 3, 2003
    2,499
    I have a surround but it would require a big box and by the time it is shipped from the US to UK and possibly re-chromed I think it would make more sense to get a new one from Brandoli.
     
  8. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    When I installed mine in 05702, I did it twice. First the typical way by starting the string pull in the bottom center. This is intended to set the forward edge. I tried that in mine and although it went smoothly I was picky about the outside gap I noticed at the top outside curve on the passenger's side. Since then I have seen this minor gap on Dinos in several concours and I believe it is a challenge area for The Dino as a type.

    I removed the windscreen and this time I started the pull at the top center then first went to the passenger's side top curve. This addresses the challenged area and I ended up with a much better result.
    Just one more thing done differently on a Dino!
     

Share This Page