Hello all. Once again, I need your help. I have tried with no luck to source the two seal terminals item #17 as shown on picture below. Anyone that knows if these still can be bought anywhere or alternatively anyone that has a decent picture of one so that I can produce them myself. What are they made of and how are they shaped? best regards Peter Image Unavailable, Please Login
Are these the end caps that go on the bottom body gaskets? Is so, there was a gentlemen, unobtanium supply, or something like that that made a bunch and a number of us bought them. They were good quality and even supplied with a black pop rivet. I’ll try to find his name. If I have the wrong part sorry for the noise. Drew
Verell is his name Search in the Boxer forum and you should find the thread Sent from my iPhone using Tapatalk
Thanks for the hint Drew but Verell is not producing this part. See picture below with yellow circle indicating the part I am looking for: Image Unavailable, Please Login
Gee Peter, I'll have to go and look at my car more carefully. Never noticed them. Sorry I could not help. Turbo-Joe - you are right. I did this from my phone and could not get the link to copy. I'm sure it was operator error. Drew
Found these pictures of the little termination piece so should now be able to make these myself. Best Peter Image Unavailable, Please Login Image Unavailable, Please Login
I made a "prototype" seal terminator and a simple silicone mold and wupti problem solved.... Best regards Peter Image Unavailable, Please Login Image Unavailable, Please Login