Which Momo closest to 348 Challenge Steering wheel

The MOD 69 is similar to the original OMP F355 Challenge wheel. The hub/spoke design is slightly different.

 

Since the first 348 Challenge cars were converted from the street versions, I've seen mostly the standard steering wheels.

However, the 95 348 Challenge has a different part number - 148496.

https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/348-group/348-challenge-1995/seat-safety-belts-and-seat.html

 

The 350mm OMP Racing OD1958 Velocita Steering Wheel is an almost exact match but it has the current OMP logo and a yellow 12:00 marker...


Image Unavailable, Please Login

 

You're correct Wade. I didn't realize that he was asking about a 348 Challenge wheel.

 

I prefer the suede wheels from the F355, and I think all of them for the 348 were leather.

 

It looks like the stock 238 wheel retrimmed with a texture area for the buttons
Image Unavailable, Please Login

 

I've owned two 348CH (one '93 and one '94 "factory" Challenge car) and both had the suede Challenge wheel. I'm not surprised that some were replaced with the standard leather one, but that's not original Challenge-spec.

 

That's good to know. Your's were OE suede? Or were they added afterwards? I've seen both but the part numbers seem to point to leather wheels.

And then I found this one:

https://www.ferrarichat.com/forum/threads/original-348c-steering-wheel.449316/#post-143154379

 

"Your's were OE suede? Or were they added afterwards?"
Both were OE suede.

 

So do I.

Here's the original OMP suede wheel which was included in the F355 Challenge Kit...


Image Unavailable, Please Login

Image Unavailable, Please Login

 

I'm not sure if you'll need a hub adapter but if those momo wheels you originally posted will fit, the OMP wheel will fit too. The bolt patterns are the same.

You can see that the 350mm OMP Racing OD1958 Velocita Steering Wheel is very similar to the F355 Challenge wheel.

 

Image Unavailable, Please Login


Image Unavailable, Please Login