348 Intake hoses/pipes | FerrariChat

348 Intake hoses/pipes

Discussion in '348/355' started by allandwf, Jan 9, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. allandwf

    allandwf Formula Junior

    Aug 27, 2011
    267
    Scotland UK
    The left hand side air intake on my 348 seems to have come adrift from the connection at the rear of the side window,( It seems loose in there,) while the RHS seems connected. How do you access that part? in through the rear wheel arch liner perhaps?
     
  2. seabass23

    seabass23 Karting

    Nov 6, 2016
    147
    St Albert, Alberta
    Full Name:
    Matt
    You shouldn't need to pull the wheel arch.

    Reach one hand through the buttress opening. This hand will guide the hose into place while the other hand goes in the engine compartment and pushes the hose. I don't believe this connection uses any type of clamp, just a semi-tight fit.
     
  3. allandwf

    allandwf Formula Junior

    Aug 27, 2011
    267
    Scotland UK
    Thanks, sounds like it might be easier with two people. I'll persevere.
     
  4. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,574
    The Brickyard
    Full Name:
    The Bad Guy
    Access is MUCH easier with the wheel well splash guards removed. You can have them off the car in 15 minutes.
     
    allandwf likes this.

Share This Page