Your Labor is alllllll-Ways free. Let's see,, 100.00 per hour. 15 hours a week. Eight years... , = $ one million dollars
Fixing Fuel Pump Voltage Drop forever. Careful,, Don't get the board too hot trying to solder on 16 gage wires. For, Your warranty from GT car parts is now void Image Unavailable, Please Login
My Bob Cat has been on top of my Storage shed. Little too close for comfort,,, I have some firecrackers for him,,, if I see him this close again. Don't want to hurt him,,, he is cool looking. Image Unavailable, Please Login
I continue to bow to your greatness.... Keep up the great work!!! Be safe with those bobcats my friend! Cheers
Thanks Paul,,,, For tuning in.. Hey!! I'm half way out of smog hell. ( California ) Got Zero,, Nada,, nothing,, at ideal speed. Hoo Raa But, I got CO, 2.27 at 2500,,, néed 1.5 Das Book says 1.2 is nominal ....??? For my Ferrari 308 GTSi Motore' Let's see,, drop Primary Pressure a little. I believe I replace the Factory 1.0mm shim down to 0.4mm.. Retest. Stay tuned,,, pun intended. Image Unavailable, Please Login
Aaaaaaaaa nope, To lean the mixture,,,, Raise primary pressure,,, a little. I have a 1.5 mm shim,, in place of the 1.0 mm factory. Whew. Next week will retest. Stay Tuned. Pun intended.... Hoo Raa Edwardo
Hey now,,, got engine cover on for a test fit... See 600.00 of bodywork,, Including shrinking dents,,, etc. and, it still needs sealed and sanded,, with a top coat of PPG Nero Urethane. ( whew) Image Unavailable, Please Login
Bart, Don't jinx me. This thing has to fall under 20k,,, or? Thus, Hey all,, I got your parts here. New in box, SS intake valves,,, half price. Edwardo Hoo RAA.!!! (it passed smog.) Now on to the exhaust system rebuild. And, see my Red Shafted Flicker... My alarm, at 6:00 am. Image Unavailable, Please Login
Alden, That is a Snow Shovel. Ha ha. Waiting for a few flakes.. (Thanks for noticing.) I use it to shovel Bull ****,,, yes, the real stuff,,, not what you-all are thinking. Edwardo
And Now, , , , ,this message from the Peanut Gallery. Stay tuned! Hoo Raa Image Unavailable, Please Login
Waiting on my muffler install. Painted Engine Cover PPG Nero. (Smile) yes it is very black,, thus, you sand for two months. (Whew) Next, Found the source for three small oil wheeps,, not really leaks,, just annoying. Two easy,, oil cooler hose fitting needed a new copper O ring,, and, the drain hose for the fwd. valve cover. Now, to pull one Cam Cog bolt,, O ring needs replaced and black grease used upon install. Image Unavailable, Please Login
Does this fix the clicking fuel pump relay? What are you fixing here? Thanks, apologies if this has been addressed and I missed it
Yes,, and other issues caused by those 2 Old blade and lug connectors. On those two 8ga red wires that run under the font bumper. And, those Connectors are metric and NLA,, unless, you buy and entire foreward wire loom. $$$$.....!!! Note, All of the cars power is lost if these Both fail. Mine are now technically bolted Togather.
Tips are to be painted,, flat White VHT. Like a Real Ferrari should. . . . Next,, we pull the foreward valve cover.
Rob, Thanks for noticing,,, not cheap but right. .... And, now to pull the front valve cover. Image Unavailable, Please Login
Valve cover off. (whew) Now, drain gas tanks and pull that gas level sender. Image Unavailable, Please Login
Torqued all head nuts to 72.4 lbs..... Six out of ten moved....!! One nut spun an additional 270 deg. No snappin der head studs. (whew) All intake valves at 0.010,, cept one at 0.011" New, exhaust valves clearance is more,,,,,?? About 0.003 per valve. But, they all varied the same clearance and a few thousandths more wont hurt at this phase. And, rear Valve cover is on. Beer me. Image Unavailable, Please Login