Original Wheels for '73 US Daytona | FerrariChat

Original Wheels for '73 US Daytona

Discussion in 'Vintage (thru 365 GTC4)' started by GSJFerrari, Dec 4, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GSJFerrari

    GSJFerrari Formula Junior
    Rossa Subscribed

    Jul 12, 2010
    313
    Stuart, FL
    Full Name:
    Greg Jones
    #1 GSJFerrari, Dec 4, 2015
    Last edited by a moderator: Sep 7, 2017
    Hi,

    On a '73 US Daytona here, it has Cromodora mag wheels (attached photo). Could you please tell me if this is correct and/or mainly is it acceptable for judging, or if they're supposed to be Borrani wire wheels, etc?

    Thanks,
    Greg
    Image Unavailable, Please Login
     
  2. Daytonafan

    Daytonafan F1 Rookie

    Oct 18, 2003
    2,748
    Surrey, England
    Full Name:
    Matthew
    Cromodora 7.5X15" are the standard wheels. Borranis were an option. I suspect there are rather more Daytonas on Borranis today than were first delivered with them.
     
  3. 375+

    375+ F1 World Champ
    Silver Subscribed

    Dec 28, 2005
    11,880
    #3 375+, Dec 4, 2015
    Last edited by a moderator: Sep 7, 2017
    Cars delivered to USA and Germany had hex nuts. Attached is a photo showing what I believe are the two correct styles; one with Cavallino for Cromodora and the other for Borrani.
    Image Unavailable, Please Login
     
  4. cheesey

    cheesey Formula 3

    Jun 23, 2011
    1,921
    hex nut is NOT correct, don't remember anything other than 8 sided

    which is it going to be ??? 6 or 8 sided... in your text you say hex which is 6 sided yet the photo shows 8 sided nuts... :=)

    the correct nut is 8 sided... if going with correct text would be an "octo" nut or whatever is correct for 8 sided nut
     
  5. 375+

    375+ F1 World Champ
    Silver Subscribed

    Dec 28, 2005
    11,880
    Octo-nut, I stand corrected.
     
  6. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,137
    Riverside, CA
    Full Name:
    Timo
    First, I think they are called OCTAGON (8-sided) nuts.
    Can't be 100% certain since I wasn't there when they all rolled out of factory gates, but IF I was judging and noticed Borrani-logo nuts on Cromodoras, I'd probably want to see additional documentation.
     
  7. 375+

    375+ F1 World Champ
    Silver Subscribed

    Dec 28, 2005
    11,880
    How about OCTAGONAL and leave it at that?
     
  8. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,137
    Riverside, CA
    Full Name:
    Timo
    Works for me :)
     
  9. Dogdish

    Dogdish Formula Junior

    Dec 27, 2005
    367
    Denver
    #9 Dogdish, Dec 5, 2015
    Last edited by a moderator: Sep 7, 2017
    Timo, works for me also
    Image Unavailable, Please Login
     
  10. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,137
    Riverside, CA
    Full Name:
    Timo
    :) , but are you sure your ratchet is big enough to break the nut loose, even if it's just 6-sided ?
     
  11. daytonaman

    daytonaman Formula Junior

    May 1, 2007
    959
    Australia
    Full Name:
    howard pigdon
    That looks hex to me.
    Some sort of deep comp knock ons for 9'' + wheels maybe.
     
  12. George Vosburgh

    George Vosburgh F1 Rookie
    Silver Subscribed

    It looks flat to me.....
     
  13. Bryanp

    Bryanp F1 Rookie

    Aug 13, 2002
    3,799
    Santa Fe, NM
    #13 Bryanp, Dec 5, 2015
    Last edited by a moderator: Sep 7, 2017
  14. wizig

    wizig Karting

    Jul 8, 2006
    89
    Leawood KS
    This topic is discussed in an episode of Chasing Classic Cars titled "Green is the New Black" (Season 6, Episode 10). After a restoration, a Daytona had points deducted at Cavallino due to the wrong knock-offs. In that case they used eared knock offs (that appeared to be from a Boxer), but in a post-judging discussion, they discuss the proper ones.
     
  15. Longstone Tyres

    Longstone Tyres Formula 3
    Sponsor

    Feb 2, 2006
    1,809
    Full Name:
    Dougal
    Here is the stuff that Borrani currently make for the Daytona Borranni wheels and spinners They currently only make spinners to go with the Borrani wheels. It is also quite complicated, so if you need to know more about the Borrani wheels and spinners i suggest you give us a call and speak to Simon, he is our in house Borrani nerd.
     
  16. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,143
    Houston, Texas
    Full Name:
    Bubba
    To the OP's point, I think wires on a Daytona are going to exhibit stress failure, eventually.
    That's a lot of horsepower to put thru them.

    The US DOT at some point in the '70s took a dim view of the spinner ears, I think it was after the Ben Hur chariot race scene.

    At that point all of the manufacturers had to rethink the hardware, giving rise to the HUGE nuts.

    Either configuration you need a huge wrench and socket to work them as on the 512BB, and later the TRs....

    HTH.
    :D :D :D
     
  17. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,143
    Houston, Texas
    Full Name:
    Bubba
    The 512BB and BBi, making no effort to please our DOT, ran the eared knock offs a bit longer....
     

Share This Page