wheels | FerrariChat

wheels

Discussion in '456/550/575' started by Andrew D., Mar 23, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Andrew D.

    Andrew D. F1 Rookie

    Jul 6, 2008
    3,979
    Goodwood Ontario
    Full Name:
    Andrew D.
    #1 Andrew D., Mar 23, 2011
    will 360 wheels (19x9, 19x13) fit a 456 without spacers or other modifications?
     
  2. Tifosi66

    Tifosi66 Formula 3

    Nov 30, 2004
    1,786
    Jiang Jia Jie
    Full Name:
    Li-Ge
    #2 Tifosi66, Mar 23, 2011
    Fronts are okay. Rears need spacers.
     
  3. Andrew D.

    Andrew D. F1 Rookie

    Jul 6, 2008
    3,979
    Goodwood Ontario
    Full Name:
    Andrew D.
    #3 Andrew D., Mar 23, 2011
    thanks for the help.
     
  4. darth550

    darth550 Six Time F1 World Champ
    Lifetime Rossa

    Jul 14, 2003
    60,791
    In front of you
    Full Name:
    BCHC
    #4 darth550, Mar 23, 2011
    Last edited by a moderator: Sep 7, 2017
  5. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,058
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #5 tazandjan, Mar 23, 2011
    Last edited by a moderator: Sep 7, 2017
    Those wheels sound like Hamann PGIIIs, no longer produced, I think. The rears are so wide I am not sure whether they will need spacers or not. Cannot tell without offset information. They are very attractive wheels and here are some photos of them on an FChatter's 575M. They would look great on a 456/M. The fronts were available in 9" and 11" sizes and I think this 575 has 11" fronts, although I have no idea how you get wheels that wide under there. The rears are 13" wide. My NF2s are 9Jx19 and 12.5Jx19, so you can see the Hamanns are some nice big wheels and will really fill out the rear wheel wells.

    Taz
    Terry Phillips
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  6. Andrew D.

    Andrew D. F1 Rookie

    Jul 6, 2008
    3,979
    Goodwood Ontario
    Full Name:
    Andrew D.
    #6 Andrew D., Mar 23, 2011
    Exactly the wheels I am looking at. Thanks for the pictures they look great on the 456.
     
  7. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,058
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #7 tazandjan, Mar 23, 2011
    Andrew- Good luck. Sets are hard to find. If the set you are considering is chromed, you should be able to paint them if you do not like the chrome. Will need a good primer coat so the paint does not flake off.

    Taz
    Terry Phillips
     
  8. jznd

    jznd Formula Junior

    Oct 26, 2008
    373
    Hong Kong
    #8 jznd, Mar 23, 2011
    FYI, I've seen PG2s on ebay advertised as "for Ferrari", but according to Hamann, only PG3s fit Ferraris. This is their email to me:


    The difference between PG2 and PG3 wheels is the outer-lip of the wheel.
    PG2 has a straight one and PG3 is stepped.
    For Ferrari models we only produced the PG3 wheels, ou cannot install the PG2 on it because of the wheel center and bore of the wheel, also the holes for scres are not suitable for Ferrai on PG2 wheels, i am sorry.
    For further assistance please feel free to contact us at any time.
    Best regards,
    Savas Simsek
    Export / Sales Department
    -----------------------------------------
    HAMANN GmbH
    Kässbohrerstrasse 3
    D-88471 Laupheim
    Tel.: +49 73 92 / 9 73 20
    Fax: +49 73 92 / 9 73 22 22
    e-Mail: [email protected]
     

Share This Page