I need a door key for my 328!

ICP's

http://www.italiancarparts.com/parts/ferrariparts.html

Keys & related parts
Ignition Key blank, Neiman Reproduction, 308/QV/Mondial: #FRAA1 $24.95
Ignition Key blank, Black with horse, 308/QV/Mondial/328/F40/F50: #FR786 $98.75 ea
Ignition Key blank, Black folding with horse, 348, Mondial t & Testarossa: #FR9540 $59.95
Ignition Key blank, Black with horse, F355: #FR0010 $64.95
Safe Door/Fuel key blank, early original, specify key # 2, 4, 6 or 8: #FR1030 $39.95
Safe Door/Fuel key blank, non-original, specify key # 2, 4, 6 or 8: #FR1030R $29.95
Safe Door/Fuel key blank, Plastic top with horse # 2: FR1147 $49.95
Safe Door/Fuel key blank, Plastic top with horse # 4: FR1148 $69.95
Safe Door/Fuel key blank, Plastic top with horse # 6: FR1149 $79.95
Safe Door/Fuel key blank, Plastic top with horse # 8: FR1150 $49.95

 

Don.

Fax me a copy of your vehicle ownership documents on +44 1784-436303 and I will rush you 2 cut keys in less than 72 hours (w/o the weekend) for US$40.

 

Is this what your looking for?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=40016&item=7947795815&rd=1

 

I found the keys for greg328 for $2.......

He bought them at King Lock and Safe for $4! HTH

No horsies or anything like that...these are just keys...

Do you have the Ilco and Taylor blank numbers?????

 

Don, I just took mine to a local locksmith, and they matched it right there. It is NOT a Ferrari key, but it does work. I think it cost about $2. The locksmith I went to is on Coit, between Arapaho and Beltline.

 

Jeff, are your door keys the small ones with the plastic surround? Do you also have the same service for the folding ignition key?

 

Hi

These are an all-metal (plasticless) blank. Sorry, no folding keys except Mondial / Testarossa / 348 / 512.

 

Make sure you tell them it's for a FIAT.

 

Be sure to drive the car over there to be sure they work after they've been cut. I made that mistake the first time. They worked in the door, but not in the louver or the center console. I had to drive the car back and get them recut.

I actually think the keys WERE for a Fiat!

 

LOL, that's something I learned from following Tom Yang's website... if it's something you can buy aftermarket, and you know the exact specs, never say it's for a Ferrari or the dollar signs appear appear in their eyeballs. Better to say it's for a FIAT

 

Sure they are!

The place where I buy mine for $2 is in an old part of town, they mentioned they keep the Italian blanks with the ones that fit the Rolls Royce.......

I looked around at their other customers and said..."Riiiiiiiiiiight!" LOL!

 

We go through this same thing all the time in the Pantera crowd. Same story there--just go to any keymaker, most likely they'll have it without saying what it is, and if you do, just say FIAT.

 

http://www.keys4classics.com/index.html

He may be in Australia, but if you give him the key code, he'll cut it, email it, etc, and does great work, I've used him a couple of times with great success.

DM.